PNL-tec GmbH Launches Matr-X Series Chassis under Rasurbo Brand

Two new PC chassis, codenamed Matr-X A and Matr-X M, have replenished the line of products supplied by PNL-tech GmbH. The company delivered its chassis under Rasurbo brand and directed the models to the average price segment. Both models are developed in midi-tower form factor and are housed in steel casings painted black; they feature identical 485x197x493 mm dimensions but differ from each other by the side panel framework. Matr-X A contains a large transparent window on the side panel, while Matr-X M has got a blind panel.



Chassis Matr-X A and Matr-X M are fully compatible with micro-ATX and ATX motherboards. Their dimensions and facilities allow for the installation of seven expansion slots, six internal 3.5-/2.5-inch drives, and four external 5.25-inch drives. Functional section consists of a special dock-station for the connection of an additional drive; this dock-station is located on the top panel. Next to it, one can find a set of USB interfaces, counting a couple of …

Meet Strike-X Air and Vx Advance Series from Aerocool

Devotees of a futuristic design and uncommon framework cannot but revel in the launch of new chassis Strike-X Air from Aerocool developers. The long-awaited product is already in the market, as well as new Vx Advance series. Chassis Strike-X Air is distinguished by the ultra-original design and open-end framework type. According to the words of Aerocool representatives, the major emphasis has been made on the handiness of usage so that each person could have a direct access to any component of the chassis.



The chassis of Strike-X Air is made of steel and supports motherboards of Micro ATX, E-ATX and ATX dimension type, and graphics cards of 330 mm. length. Expansion cards and interface panels are installed due to the ten slots in the rear part of the device. The chassis is equipped with three external modules of 5.25 and 3.5 inches type. The clipboard is intended for a single USB 3.0 socket, three USB 2.0 sockets, and a couple of 3.5 mm. sockets for headsets with a microphone. … …

The official announcement of the motherboard Biostar Hi-Fi Z77X

Company Biostar, taking the example of the motherboard market leaders, manufactures the product for the audiophile — Biostar Hi-Fi Z77X. In the latest model are involved: the processor socket LGA1155, the flagship chipset for the platform (Intel Z77), three full-height PCI Express x16 and 13-channel subsystem of CPU power. The developer promises high quality audio through 7.1-channel HD Blue-ray audio codec ALC898, Technology THX TruStudio Pro, Hi-Fi Ground (multi-layer PCB with protectors properties), and Puro Tone (signal / noise ratio — 110 dB), as well as resistors, Hi-Fi Resistor with tin oxide capacitors and Hi-Fi Cap.



Four slots for memory with dual access are designed for installation of modules DDR3-1066/.../2600 totaling 32 GB. In addition, the construction of SLI and CrossFire configurations using the formula «x8 + x8» is possible. The lower slot PCI-E 2.0 x16 x4 is good to use for high-speed SSD-drives, and «external» controllers. PCB has six ports Serial ATA …
Get computer-assisted driver search with our brand utility *
Start
* The Utility doesn't need to be installed. DevID Agent can be easily run, it will found out
which devices need to install or update drivers.
The Utility doesn't contain viruses or malicious code

Dell Inc. Latitude D620 based on Dell Inc. 0KX350

  • BATTERY
  • COMPUTER
  • HDC
  • KEYBOARD
  • MEDIA
  • MOUSE
  • NET
  • PCMCIA
  • PORTS
  • PROCESSOR
  • SYSTEM
  • UNKNOWN
  • USB
  • VOLUME