Zalman Introduces Highly Efficient FX70 Passive Cooler

Zalman, a renowned South Korean designer of various hardware solutions, has recently introduced its latest CPU passive cooler, entitled FX70. The new-entry features 110x140x158 mm dimensions and comes without any fans. However, if there is a need to cool down CPUs with the TDP level higher than 80 W, the customer is free to enhance the facilities by adding two 120 mm fans. The latter are fixed to the heatsink by means of four brackets.



Zalman FX70 is an optimal choice for the following platforms: Intel LGA 2011/1366/115x/775 and AMD FM2/FM1/AM2/AM2+/AM3/AM3+. This cooler fits in any mid-tower ATX and larger PC chassis. The cooler’s framework consists of a copper base, pierced by six nickel-plated heatpipes, and of fifteen heatsink plates with an offbeat design, codenamed Twist; they are called to dramatically improve the process of heat management.


Fanless framework is regarded to be an advantage due to three reasons. First of all, pure heatsink provides absolutely no …

Preliminary Acquaintance with VGA-Cooler MK-26 V2 from Prolimatech

Prolimatech Inc., an established manufacturer of high-end air-cooling systems, is about to release its new VGA-cooler, codenamed MK-26 V2. The upcoming product will be compatible with graphics cards from AMD manufacturer (up to Radeon HD 7000 Series) and Nvidia (up to GeForce GTX 600 Series). According to the preliminary data, the new cooler models will be capable to manage up to 320W of extra heat to provide for the most optimal GPU cooling down.



The major distinction of MK-26 V2 cooler is its impressive dimensions which equal to 230x146x47 mm. Thus, the cooler will take the spacing of five expansion slots, leaving no room for SLI/Crossfire. The cooler has got a copper base which accommodates six copper heatpipes, 6mm in gauge each pipe. Those pipes pierce two heterogeneous blocks consisting of thin aluminum fins which are designed in correspondence with Buckle Fin technology. The fins are distinguished by the unusual form that is called to promote for better heat removal …

Inno3D launches video cards iChill GTX 680/670 LCS

Hong Kong manufacturer of graphics cards Inno3D announced the delivery of two fresh products based on the base of the graphics core Nvidia GK104 and the original cooling system Arctic Accelero Hybrid, — iChill GTX 680 iChill GTX and LCS 670 LCS.



It should be noted that the models Inno3D iChiLL Black Series GeForce GTX 680 Accelero Hybrid and Inno3D iChiLL Black Series GeForce GTX 670 Accelero Hybrid withdrawal of excess heat is engaged in a hybrid cooler ARCTIC Accelero Hybrid. New models use NWO Danish contractor Asetek to cool the GPU. It includes a water block with copper base and a built-in pump, rubber tubes that extend to the radiator, and 120-mm fan with PWM speed control. Batteries and GDDR5 memory chips are covered with a flat radiator (PA plate) in black, which is blown by 80-mm fan attached to three slot casing.


Inno3D and Arctic promise significant improvement in temperature of CPU GK104, which made it possible to raise the frequency from 1006 (1058) / 6008 …
Get computer-assisted driver search with our brand utility *
Start
* The Utility doesn't need to be installed. DevID Agent can be easily run, it will found out
which devices need to install or update drivers.
The Utility doesn't contain viruses or malicious code

Dell Inc. Latitude D620 based on Dell Inc. 0KX350

  • BATTERY
  • COMPUTER
  • HDC
  • KEYBOARD
  • MEDIA
  • MOUSE
  • NET
  • PCMCIA
  • PORTS
  • PROCESSOR
  • SYSTEM
  • UNKNOWN
  • USB
  • VOLUME