Elsa to Replenish the Line of Graphics Cards with GeForce GTX 670

Elsa Technology has announced the future release of its alternative version of graphics adapter Nvidia GeForce GTX 670. The new model is developed according to 28 nm technological process and employs GK104 chip with 1344 CUDA cores. It also boasts the implementation of advanced architecture, called Kepler. The major distinction of Elsa GeForce GTX 670 from its reference models is the integration of Silent Air Cooling technology (SAC).



This model is based on blue circuit board destined for PCI Express 3.0 x16 bus. Elsa graphics card is equipped with GDDR5 memory type (256 bit interface) and has got 2048 Mb of overall volume capacity. The backplate is assigned for a couple of DVI ports, a single HDMI, and one DisplayPort 1.2 port. This graphics adapter is compatible with DirectX 11 and employs Nvidia FXAA and Nvidia TXAA technologies for the improvement of imaging. It also supports Adaptive Vsync mode for more smooth games playback, as well as, Nvidia SLI, Nvidia 3D Vision, Nvidia …

Cooler Arctic Accelero Xtreme 7970 Review

Success in hardware industry is greatly relied on the technologies applied by the manufacturers, quality of products and the frequency of new releases. The development of new technologies and quality of the produced items demands sufficient resource base and bright intellectuals who can influence the frequency of new releases. Here everything is interrelated. Arctic Cooling AG company does not sacrifice any of the success aspects and frequently gladdens its clientele with outstanding products. Arctic Accelero Xtreme 7970 is a bright representative of coolers for Accelero graphics cards which is able to offer multiple opportunities.



Framework Peculiarities


The first peculiar feature that might strike the customers’ eyes is that cooler Accelero Xtreme 7970 framework does not differ a lot from its predecessors. It is equipped with three 92 mm fans which go in a plastic cover, and with two radiator sections based on five copper heat tubes. This model claims to endure 300 W of …

The Introduction of Transparent Chassis from Scythe

Scythe has recently amazed the community by the introduction of absolutely transparent chassis. ACB-Type3 model preserves the cutout of the standard Mid-Tower chassis solutions, but is made of transparent acrylic plates. One more peculiarity of this model is the parallel to the base localization of motherboard. Besides, ACB-Type3 is compatible with motherboards of various form-factor, including mini-ITX, micro-ATX, and ATX.



The motherboard is accommodated on a special tray. Right under this tray the customers are able to find a set of bays designated for the installation of PSU, three 3.5-inch drives, a couple of 2.5-inch drives, and three 5.25-inch drives. The chassis is compatible with CPU coolers of up to 190 mm in height.


At the same time, this model goes without any fans or side panels; this attributes the model to Open-Air segment. The product can content itself with practically noiseless passive system.


Scythe ACB-Type3 is equipped with sufficient number of …
Get computer-assisted driver search with our brand utility *
Start
* The Utility doesn't need to be installed. DevID Agent can be easily run, it will found out
which devices need to install or update drivers.
The Utility doesn't contain viruses or malicious code

Intel Corporation D945GCZ

  • CDROM
  • COMPUTER
  • DISKDRIVE
  • DISPLAY
  • HDC
  • HIDCLASS
  • KEYBOARD
  • MEDIA
  • MOUSE
  • NET
  • PORTS
  • PROCESSOR
  • SYSTEM
  • USB
  • VOLUME