Company XFX is preparing Radeon HD 7970 GE with Double Dissipation cooler

American vendor XFX is about two weeks to release a Radeon 7970 Edition Double Dissipation (model code — FX-797G-TDF). It combines the capabilities of GPU Tahiti XT2 with a higher overclocking potential and the TDP, rather than at Tahiti XT, PCB reference design, but without a single phase power supply (6 +1), and the cooling system in the vaporizing chamber, an array of aluminum fins, PA plate (the same heatsink for the VRM and memory), as well as the two fans standard size 90 mm.

New model will get the recommended for the Radeon HD 7970 GE frequency ratio 1000/6000 MHz for core and chips GDDR5. The graphics chip will operate at 1050 MHz in the load. Recall that the “usual” HD 7970 was limited to regular frequencies 925/5500 MHz and did not support dynamic overclocking.

The configuration of video outputs is almost standard: from the five of DVI-I, DVI-D, HDMI and 2x Mini DisplayPort for some reason excluded DVI-D. The additional power is supplied by one 8-pin and one …

SilverStone Debuts with SST-ST30SF Power Supply

SilverStone Technology has recently introduced its newest SFX power supply unit. Codenamed SST-ST30SF, it features 125x100x63.5 mm dimensions and weighs 800 g only. The unit is estimated for 300 W power and is capable to demonstrate more than 81% efficiency in 230 V networks. High efficiency level allowed the model to gain 80Plus Bronze certificate.

The most uncommon feature ascribed to SST-ST30SF is that it can operate in passive mode if thermal conditions allow. The unit is equipped with a fan of 80 mm dimensional type; it starts rotating only when the surrounding temperature reaches 55 degrees. This promotes for a considerable power reduction and practically silent work when the fan gets disabled. An average noise level on active operation makes up 18 dB.

SilverStone furnishes the new entry with a single +12V rail, estimated for 22 A current. In its turn, +3.3V rail is estimated for 21 A current, while +5V rail – for 20 A current. It should be noted that this unit …

PSU Hiper K900 Review

The tendencies of the past several years prove that contemporary customers are rather demanding as to the overall characteristics of their PCs, so to their singular hardware components. Those demands primarily touch upon performance, efficiency and power-saving properties of products, however, design and ergonomics are given much attention as well. PSU devices are not an exclusion, and customers tend to choose not only high-end products with outstanding parameters, but also products with compact dimensions and attractive design. Thus, PSU manufacturers try to comply with the modern tendencies and release devices for people with various demands. PSU Hiper K900 is the product destined for customers with heightened requirements to the performance and moderate desires as to its design.

Design and Delivery Kit

Hiper K900 design is characterized by simplicity and observance of traditional forms. The casing is made of dull black plastic which combines with the silver-color fan …
Get computer-assisted driver search with our brand utility *
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code

Intel Corporation D945GCZ

  • 1394
  • HDC
  • NET
  • USB