Gigabyte Offers GA-6PXSVT Motherboard for High-Yield Workstations

Gigabyte Technology has expanded its product line of process-specific motherboards with a new model, codenamed GA-6PCSVT. Based on Intel C602 chipset, the newbie is primarily targeting high-yield workstations and rack servers. This model is thought to support Intel Xeon E5-1600 v2 and Intel Xeon E5-2600 v2 CPUs for Socket LGA 2011 with the maximal TDP level of 150 W.

The Gigabyte GA-6PXSVT accommodates eight slots for the incorporation of four-channel RAM: DDR3 standard, up to 64 GB capacity, support for 1600 MHz modules. Expansion of possibilities might be realized due to three PCI-e 3.0 x16 slots; there is a chance of creating various graphics configurations (SLI or CrossFire).

Storage section offers ten SATA III 6 Gb/sec ports, as well as three SATA II 3 Gb/sec ports. This provides for the connection of up to fourteen hard drives or solid-state devices at a time. A part of the ports is backed by means of Marvell 88SE9230 controller. Gigabyte has taken care about …

LEPA to Release MX-F1 and MaxGold 1000 PSUs

LEPA is ready to release a new series of entry-level power supply units entitled MX-F1. The series counts three models of 400 W, 500 W and 600 W capacity: N400-SA-EU, N500-SA-EU and N600-SA. In addition, the company has expanded its MaxGold line with a flagship 1000-watt model. It corresponds to Intel ATX12V 2.4 standard and employs an optimized hardware design.

To begin with, MX-F1 PSUs offer 87% of ultimate efficiency. Operating at 20%/50%/100% loading, they are able to achieve 82%/85%/82% efficiency correspondingly. Nonetheless, the models cannot receive 80Plus Bronze certificate, since they feature limited voltage input range. All the models within the series employ a single +12V rail and boast a non-modular design.

This promotes for the connection of middle-efficiency components. They support Active PFC and a wide spectrum of protective functions (over-voltage, over-current, over-power, short-circuit). Cooling of internal components is ensured by a single 120 mm fan. …

Release of Chassis Aresze Subverter 7650B with Efficient Cooling System

Aresze is going to release its new series of chassis developed in Mid-Tower form factor. Codenamed Subverter 7650B, these chassis are primarily intended at consumers with the heightened demands to the layout and integration but with rather 'modest' financial possibilities. Subverter 7650B series can boast an outstanding efficiency pertained to cooling down. In addition, the internal zoning and integration of this model are similar to that implemented in more costly line of products manufactured by Aresze.

Aresze took all efforts to achieve the maximal results applied to the efficient cooling down. Thus, the framework zoning for the airflow distribution has been designed according to the company's own technology. The bay designated for graphics cards, which can support the cards of up to 300 mm in length, can be applied for the wide range of solutions. The 120 mm fan is located at the top part of the chassis and serve the blowing out means; this way the hot airflow does not …
Get computer-assisted driver search with our brand utility *
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code

Download driver UFSx Device, (c) SarasSoft

Vendor UFS2
Driver type USB
Version 1.06.06
Driver Date 2003-10-30
Operating system XP XP64
Upload 2011-06-21
Driver for UFSx Device, (c) SarasSoft you can download from
mirror 1:
7130_ufs.rar (656 Kb)
oTweak Software

[-] Supported devices

UFSx Device, (c) SarasSoft USB\VID_0888&PID_5508
UFSx Device, (c) SarasSoft USB\VID_0888&PID_5508
UFSx Device, (c) SarasSoft USB\VID_0888&PID_5508