New Gaming PC Chassis Versa G2 from Thermaltake

Thermaltake, a renowned Taiwanese PC hardware developer, has officially divulged the specifications of its new gaming chassis, codenamed Versa G2. The belonging to the gaming echelon is vindicated primarily by an eye-catching design. The casing is developed in mid-tower form factor, and is made of a durable steel (SGCC) and plastic. Its side plate contains an acrylic window with a few ventilation grids that showcase the internal layout of the chassis.



Thermaltake Versa G2 features 481x196x429 mm dimensions and is alloted for seven PCI/PCI Express expansion cards. It supports motherboard of ATX and micro-ATX standard and is notable by lower PSU localization. The internal spacing within the enclosure is sufficient for the installation of CPU cooler not more than 155 mm in height and of graphics card not more than 320 mm in length. The model is equipped with three external 5.25-inch drives and a single 3.5-inch drive, as well as with five internal 3.5-inch and a single 2.5-inch …

Preliminary Acquaintance with VGA-Cooler MK-26 V2 from Prolimatech

Prolimatech Inc., an established manufacturer of high-end air-cooling systems, is about to release its new VGA-cooler, codenamed MK-26 V2. The upcoming product will be compatible with graphics cards from AMD manufacturer (up to Radeon HD 7000 Series) and Nvidia (up to GeForce GTX 600 Series). According to the preliminary data, the new cooler models will be capable to manage up to 320W of extra heat to provide for the most optimal GPU cooling down.



The major distinction of MK-26 V2 cooler is its impressive dimensions which equal to 230x146x47 mm. Thus, the cooler will take the spacing of five expansion slots, leaving no room for SLI/Crossfire. The cooler has got a copper base which accommodates six copper heatpipes, 6mm in gauge each pipe. Those pipes pierce two heterogeneous blocks consisting of thin aluminum fins which are designed in correspondence with Buckle Fin technology. The fins are distinguished by the unusual form that is called to promote for better heat removal …

Motherboard Biostar Hi-Fi Z87X 3D Review

When all the turmoil connected with the launch of new Intel Haswell processors becalmed, potential customers could finally get their own opinion about CPU facilities and decide whether an upgrade is a sensible move. A flagship motherboard from Biostar, entitled Hi-Fi Z87X 3D, proves that it worth the effort. Biostar was one of the first manufacturers in the market to pay much attention to audio subsystem. Hence, all the best audio elaborations have been aptly implemented in its flagship board.



General Specifications


Biostar Hi-Fi Z87X 3D positions itself as the motherboard for overclocking, featuring:

— chipset: Intel Z87;

— form-factor: ATX, dimensions – 305x244 mm;

— socket and supported processors: Socket 1150, Intel Haswell Pentium, Core i3/i5/i7;

— built-in graphics core: Intel HD Graphics 4600;

— memory: type – DDR3, capacity – up to 32 GB, clock frequencies – 1066 MHz – 2800 (OC) MHz;

— expansion slots: three PCI-e 2.0 x1, two …
Get computer-assisted driver seach with our brand utility *
Start
* The Utility doesn't need to be installed. DevID Agent can be easily run, it will found out
which devices need to install or update drivers.
The Utility doesn't contain viruses or malicious code

Dell Inc. Dimension 4700 based on Dell Inc. 0M3918

  • CDROM
  • COMPUTER
  • DISKDRIVE
  • DISPLAY
  • FDC
  • FLOPPYDISK
  • HDC
  • HIDCLASS
  • KEYBOARD
  • MEDIA
  • MODEM
  • MONITOR
  • MOUSE
  • NET
  • PORTS
  • PROCESSOR
  • SYSTEM
  • USB
  • VOLUME