CPU Cooler Deepcool Ice Blade Pro v2.0 Review

Deepcool can be boldly attributed to the manufacturers that are constantly improving their mastery is the elaboration of hardware components. The company’s second revision of CPU cooler Ice Blade Pro is a bright confirmation of this statement. Codenamed Ice Blade Pro v2.0, this product is supposed to exceed its predecessor in performance, noise level and consumer appeal. But let’s start its reviewing from technical peculiarities.



Technical Peculiarities


Deepcool Ice Blade Pro v2.0 features the following specifications:

— dimensions: 161x125x70 mm (+fan(s) 120 mm), ultimate weight – 981 g;

— compatibility: Intel Socket LGA 2011/1366/1156/1155/775, AMD Socket 939/FM1/FM2/AM2/AM2+/AM3/AM3+;

— heatsink: tower framework consists of 49 aluminum plates, 4 heatpipes and a base supporting Core Touch technology;

— fan: dimensions — 120x120x25 mm, type of bearing – fluid-film bearing, nominal/startup fan voltage – 12/7 V, maximal power consumption – …

EKWB Launches a New Water Block for GV-N680SO-2GD

Early August of 2012 was marked for Gigabyte by the release of its one more graphics card, codenamed GeForce GTX 680 SOC (GV-N680SO-2GD). This card can boast the availability of high factory frequencies and quite mighty cooling system. The nominal frequencies have been heightened to 1137MHz, 1202MHz, and 6200MHz for memory. Such outstanding characteristics required the integration of a high-quality and high-performance cooling system which consisted of five(!) fans. This made the card rather voluminous, cumbersome and noisy. That was when EKWB decided to design a dedicated water block to be employed with this remarkable graphics adapter.



Water block EK-FC 680 GTX SOC is housed on a copper base, good-quality acetal cover, and rubber shims as a compressor. The model is delivered with pre-installed fixing stands to facilitate the installation. It should be noted that this water block entirely covers the frontal part of the graphics card, along with the adjacent RAM modules and …

MSI is preparing new model - Radeon HD 7970 with a water-block

The well-known in IT-maker Company MSI announced about appearance of new videoadapter based on GPU Tahiti XT chipset. Its diversity from the other Radeon HD 7970 can be seen with the naked eye, instead of an air cooler practically the entire surface of the PCB is covered with waterblock brand EK. It differs markedly from the original version, since it is designed specifically for the MSI R7970 Lightning model. Relation of adapter to the Lightning series is easily determined by the inscription at the interface connector PCI-E 3.0 x16, as well as non-standard set of video outputs (2x DVI, 4x Mini DisplayPort) and configuration of additional power connectors (2x PCI-E Power 8-pin).



Obviously, the accelerator is positioned as the Radeon HD 7970 GHz Edition and has a nominal frequency of at least 1050 MHz. Will MSI risk, like Sapphire did, and provide the card with 6 GB of memory? Probably not. The «advanced» composition of the printed circuit board and water block of full coverage …
AUTOMATIC SEARCH & INSTALL
device drivers
Freeware
Download (9MB)
DevID agent v4.34
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code

Acer Extensa 2350

  • BATTERY
  • COMPUTER
  • DISKDRIVE
  • DISPLAY
  • HDC
  • HIDCLASS
  • KEYBOARD
  • MEDIA
  • MODEM
  • MONITOR
  • MOUSE
  • NET
  • PCMCIA
  • PROCESSOR
  • SYSTEM
  • USB
  • VOLUME