Xigmatek Outs Midgard III Case with Wireless Charger Dock

Xigmatek, a renowned Taiwanese designer of prime-class PC hardware, has launched a follower of the well-known Midgard case series – the Midgard III. It features 409(d)x515(h)x260(w) mm dimensions, always ready to accommodate mini-ITX, micro-ATX, and standard ATX motherboards. The case has got a sleek stern design, though is peculiar by the availability of a unique wireless charger station (Qi standard), leaving all competitors way behind (in terms of connectivity).



Xigmatek Midgard III comes with three external 5.25-inch bays, eight internal 3.5/2.5-inch bays, and seven expansion slots for add-ons. The framework is predestined to accommodate standard ATX/EPS power supply units, CPU coolers of 160 mm in height, graphics cards of 330 mm in length, and heatsinks of 300x50 mm dimensional type. The hidden in the top-front facet I/O panel houses Reset button, a pair of USB 3.0 ports, the same number of USB 2.0 ports, and two audio in/out sockets.


Optimal airflow within the …

Plextor Prepares the Release of M5P SSD

Plextor is currently preparing a new SSD series, codenamed M5P. According to the forecasts, this series will be differentiated by high-performance characteristics and Serial ATA 3.0 interface. M5P will be represented by three models of 128 GB, 256 GB and 512 GB volume capacities. All the model lines are developed with the utilization of 19 nm technological process. In addition, all SSDs will be equipped with NAND flash-memory (MLC Toshiba) and Marvell 88SS9187 controllers.



Three models differ from one another by the flash-memory volume. Thereby, 128 GB models accommodates 256 MB of DDR3 cache-memory, 256 GB model – 512 MB, and the last one, 512 GB model – 768 MB. Those SSDs support SATA 6 Gb/sec.


The manufacturer claim that the maximal consecutive reading and writing speeds will achieve 540 Mb/sec and 340 Mb/sec correspondingly (with 128 GB model); 256 GB and 512 GB models will achieve 540 Mb/sec in reading and 450 Mb/sec in writing mode. At the same time, M5P series …

Sapphire Vid-2X Display Expander Review

Display expanders cannot be found in abundance on PC hardware market. In fact, not every user knows what the main purpose of those devices is. In the most general meaning, display expanders are splitters that allow the connection of two monitors towards a single output on a graphics card. However, their destination is not limited by this function only, since it might serve some other means as well. Sapphire introduces its own similar solution in the form of Vid-2X Display Expander model. The manufacturer assures that this splitter differs from traditional couplers in terms of functional and reliability.



Framework


Splitter Sapphire Vid-2X Display Expander is housed in a black plastic casing with gray side plates. The casing's cover is divided in two parts; the spacing between them serves ventilation and heat management means. The base accommodates rubber stands which provide for the framework steadiness. It should be mentioned that Sapphire delivers two models simultaneously …
Get computer-assisted driver search with our brand utility *
Start
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code

Dell Computer Corporation OptiPlex GX270 based on Dell Computer Corp. 0U1325

  • CDROM
  • COMPUTER
  • DISKDRIVE
  • DISPLAY
  • DRIVERINTERFACE
  • FDC
  • FLOPPYDISK
  • HDC
  • HIDCLASS
  • KEYBOARD
  • MEDIA
  • MONITOR
  • MOUSE
  • NET
  • PORTS
  • PROCESSOR
  • SYSTEM
  • USB
  • VOLUME