Transcend Teases MTS Series of M.2 Drives

In the light of a violent proliferation of M.2 standard in mobile and desktop PCs, a number of manufacturers shifted their production into this segment. Transcend is one of the first companies to introduce its own M.2 rendition, teasing new MTS lineup that involves three different series: MTS400, MTS600, and MTS800. They feature M.2 2242, M.2 2260 and M.2 2280 form-factors correspondingly, that is to say they have different PCB length: 42, 60 and 80 mm respectively.

All three M.2 drives series are designed on MLC NAND flash memory chips. They accommodate DDR3 cache with SATA III 6 Gb/sec interface. The first, MTS400 series, embraces four models of 32 GB, 64 GB, 128 GB, and 256 GB capacity, whereas MTS 600 and MTS800 count five models: plus 512 GB model in addition to the junior four.

As for speed characteristics, Transcend MTS400 is able to demonstrate up to 560 MB/sec Read speed on sequential operations and up to 160 MB/sec Write speed on analogous conditions. Its …

PowerColor Intros New Graphics Card with Fling Force Cooler

TUL Corporation, in the framework of its PowerColor brand, introduces a new graphics card with quite an original way of air cooling organization. The new-coming adapter, codenamed PowerColor Radeon HD 7850 Fling Force, employs 'two-storied' cooler of an unusual structure. Along with an aluminum heatsink, copper heat pipes, and a voluminous fan, the manufacturer implemented non-monolithic fan ribs. Their tips are fixed to the main part in a way to change their location relative to the plain of rotation.

On conditions of low rotational speed, tips of the ribs are located at approximately 80 degrees angle relative to the graphics card. On conditions of heightened speed, the ribs become more linear; this way, the impeller diameter enlarges from 92 mm to 95 mm. Such structural approach to the fan framework develops into an improved performance and air cooling effect.

The model is based on Pitcairn chip, developed on Graphics Core Next architecture under 28 nm technological …

Company XFX is preparing Radeon HD 7970 GE with Double Dissipation cooler

American vendor XFX is about two weeks to release a Radeon 7970 Edition Double Dissipation (model code — FX-797G-TDF). It combines the capabilities of GPU Tahiti XT2 with a higher overclocking potential and the TDP, rather than at Tahiti XT, PCB reference design, but without a single phase power supply (6 +1), and the cooling system in the vaporizing chamber, an array of aluminum fins, PA plate (the same heatsink for the VRM and memory), as well as the two fans standard size 90 mm.

New model will get the recommended for the Radeon HD 7970 GE frequency ratio 1000/6000 MHz for core and chips GDDR5. The graphics chip will operate at 1050 MHz in the load. Recall that the “usual” HD 7970 was limited to regular frequencies 925/5500 MHz and did not support dynamic overclocking.

The configuration of video outputs is almost standard: from the five of DVI-I, DVI-D, HDMI and 2x Mini DisplayPort for some reason excluded DVI-D. The additional power is supplied by one 8-pin and one …
Get computer-assisted driver search with our brand utility *
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code

You were looking for

HDAUDIO\FUNC_01&VEN_111D&DEV_7605&SUBSYS_102802F2& REV_1004\4&13716F8&0&0001?text=HDAUDIO\FUNC_01&VEN_111D&DEV_7605&SUBSYS_102802F2& REV_1004\4&13716F8&0&0001