Graphics Card Asus Matrix-HD7970-P-3GD5 Review

Model Matrix-HD7970-P-3GD5 is supposed to be the most powerful graphics card delivered by Asus that is based on Tahiti chip. This card belongs to Matrix series targeting primarily gamers and overclockers. In addition, Radeon HD 7970 is one of the most highly-productive adapters with a striking overclocking potential. Thus, Asus has managed to implement both performance and power in a single product to provide for the utmost results and utmost convenience.



Design


Graphics card from Asus features similar to other Matrix-series models design. Its frontal panel consists of a large cooler with two voluminous fans. This cooling system is covered by a shroud with red insertions. Its rear panel accommodates a perforated plate that leaves bare only a few zones on a textolite (CrossFire sockets, iROG controller, VGA Hotwire zone); spacing under the cooler is covered by a thick plate-heatsink that prevents textolite deformation. The side panel contains a pair of 8-contact power …

SilentiumPC Launches All-Powerful Grandis XE1236 CPU Cooler

SilentiumPC has announced the release of its newest cooling solution – an all-powerful Grandis XE1236 CPU cooler. The model features 130x105x158 mm dimensions and weighs 1160 g. According to the manufacturer, it is able to manage heat on top loading, preserving CPU in sober thermal conditions. The cooler is backed by a 2-year’s warranty and comes at $49.



SilentiumPC Grandis XE1236 consists of a copper base, six U-shape heatpipes (6 mm), a two-section aluminum heatspreader with a polished base, and a pair of fans of 120 mm dimensions. The GF12-25 fans are based on a fluid-dynamic bearing that is set to demonstrate up to 50 thousand hours of fool-proof operation.


To continue, the connection to the motherboard is realized via 4-pin connector. The fans might operate at +12V voltage, accelerating speed from 500 RPM to 1500 RPM due to PWM technology support. On the maximal speed the noise level does not exceed 21 dB. Upon the whole, the blades can produce up to 55 CFM …

The Ribbed Design Turns Akasa Newton S7 Case into a Heatsink

The Akasa Co. keeps releasing cases for system cards, intended for Intel NUC series mini PCs. The latest Akasa Newton S7 sample is aimed at Intel NUC7i5BNH, NUC7i5BNK, NUC7i3BNH and NUC7i3BNK sets boards, and the most important matter for replacing a standard case with a new one is aluminium utilization, providing passive CPU cooling. The framework upper lid and sides are made ribbed to perform the role of an effective heatsink.



On the front panel there are two USB 3.0 ports, the power button, the infrared sensor, as well as the headset and mic jack. The back panel has two connectors for removable antennas of wireless modules. Inside there is enough space for a 2.5-inch drive, not higher than 9.5 mm.


The Akasa Newton S7 framework’s modest dimensions (176.5 x 200 x 53.5 mm only) and the standard VESA mounting let fix this specialty on a display’s back panel.
AUTOMATIC SEARCH & INSTALL
device drivers
Freeware
Download (9MB)
DevID agent v4.43
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code

3Dlabs, list of device classes

Here you can find a list of devices designed by 3Dlabs. You can download drivers from the following categories: Videocards. In order to download a required driver, choose an appropriate category from the list.

DevID : : 3Dlabs