Good overclocking facilities are what the majority of customers look for in contemporary motherboards. In this light, the manufacturers establish various price ranges, depending on the product’s overclocking potential. As usual, boards from budgetary lines cannot boast such potential, though there are some exclusions. Biostar A55MD2 is considered to be one of the cheapest solutions for FM2 platforms. Still, its layout marvels by the availability of CPU boost facilities, as well as gigabit network interface.



Design and Layout


Motherboard Biostar A55MD2 distinguishes itself by rather compact dimensions: 226x178 mm (uATX form-factor). The model accommodates an amplifying board that is made of a metallic fusible element. The chipset is cooled down by a small-sized aluminum heatsink, while field transistors are avoid of any cooler. This might signify about some inconsideration pertained to thermal environment. Power supply activity is realized by means of 24-contact and …

Current conjuncture in the market of drives proves that SSDs do not require special advertising. Their demand index rises every single day, along with the increasing supply. Corsair, a well-known manufacturer of various PC hardware solutions, has successfully 'assimilated' advanced LAMD LM87800 controllers, and developed two SSD items at once based on this controller. Codenamed Corsair Neutron and Corsair Neutron GTX, these drives are intended at different customer audiences. Both models feature similar internal layout, but differ in the integrated interfaces and memory types.



Specifications


Model Corsair Neutron is considered to be cheaper than GTX version, so its specifications are more modest. It employs MLC flash-memory type with ONFI interface developed under 25 nm technological process. Its companion, Corsair Neutron GTX, belongs to the high-end SSD echelon and employs MLC flash-memory type with Toggle Mode interface designed under 24 nm technological process. Both …

In early August, it was mentioned about the fact that MSI developer of motherboards is preparing to release three new products in the form factor Mini-ITX on chipsets A85, B75, and Z77. As it turned out, the first low-cost board will be MSI B75IA-E33 — it will start selling in Europe at the end of this week at prices ranging from € 95.



The functionality of this product is limited with respect to the other two models; however, a set of components in B75IA-E33 is very decent. LGA1155 processor socket is energized by three phases (provides additional power to the ATX12V 4-pin), hidden under a small cooler chipset Intel B75. Available one connector PCI Express 3.0 x16, two slots for memory modules DDR3-1066/1333/1600 total up to 16 GB, SATA port 6Gb / s and SATA 3 Gbit / s (3 units) to connect storage devices.


A pair of USB 3.0 on the rear panel are completed with a 19-pin connector on the PCB, through which on the front panel I / O can be taken two SuperSpeed USB. The …