Tiománaithe ag AITHEANTAIS nó ainm an gléas

Feistí Aitheanta:165022367

An ceann deireanach ar a dtugtar tiománaí: 23.12.2020

Ad

Новости devid.info

Greeting One More Chassis of Urban Series from Thermaltake

Following the release of Urban S31 PC chassis, Thermaltake put its best foot forward to introduce one more representative of Urban series – Urban S41. This is a mid-tower case of a minimalistic design, with totally black exterior and interior. The model is vested in SECC steel coverage and will be available in two framework variations: with a large side-facet window and without it. In its entirety, the chassis features 516x220x520 mm dimensions and weighs 8.9 kg.

Thermaltake Urban S41 is ready to welcome all contemporary motherboards of ATX and micro-ATX standard. Despite its mid-tower framework nature, its internal capacity does not yield to some full-tower case species. Therefore, it positions four external drive bays of 5.25-inch format, five internal bays for 3.5-inch or 2.5-inch drives, and seven slots for PCI expansion cards. Additionally, the case is equipped with an external top-facet dock for the installation of drives with SATA interface (HDD/SSD). The frontal I/O panel takes a typical look: two standard 2.5 mm audio slots for peripherals, two USB 2.0 and two advanced USB 3.0 ports.

To add to Urban S41 internal capacity properties, it should be noted that it is able to allocate CPU coolers of up to 160 mm in height and graphics adapters of up to 315 mm in length; besides, on demounting a dedicated drive bay, the length of the admissible cards might approximate 435 mm.

Cooling of all vital system components is entrusted to three pre-installed fans. Frontal 120 mm fan enjoys quite silent operational properties (14-16 dB only) on 800-1000 RPM speed; rear 120 mm fan develops speed up to 1000 RPM and remains silent even on high volumes (not more than 16 dB); top 200 mm fan is characterized by even more silent operation (13-15 dB only), demonstrating the speed from 600 RPM to 800 RPM.

With the purpose to enhance the cooling effect, the user is free to install one more 120 mm fan at the bottom part of the case. Typically to all present-day chassis, Urban S41 has got special holes at rear facet for the water-cooling system tubes deployment.
  • 0
  • 28 March 2013, 13:47
Only registered users can comment.