Preview of video-card Club 3D Radeon HD 7970 royalAce

Club 3D has released fifth model of the Radeon HD 7970 — with the prefix royalAce in the codename. Before «ace» there were represented “the king” HD 7970 royalKing and “Queen” HD 7970 royalQueen. New model works at higher frequencies, and supports dynamic overclocking. Into the configuration of Club 3D Radeon HD 7970 royalAce inserted 2048 stream processors. Nominal of core is 1050 MHz in normal mode and 1100 MHz in 3D-games. GDDR5 memory chips make total of 3 GB and operating at 6 GHz, the memory bus is 384 bits.



Club 3D Radeon HD 7970 is notable by its effective use of a proprietary cooling system. It is equipped with a dual-slot cooling system royalAce consisting of at least three copper heat pipes, an array of aluminum fins and a pair of fan size 80 mm. According to the manufacturer reports, the construction is very quiet (31.5 dB in the normal mode of operation, 38 dB — under load), and secondly, provides a nice temperature (average during the game GPU …

MSI is preparing new model - Radeon HD 7970 with a water-block

The well-known in IT-maker Company MSI announced about appearance of new videoadapter based on GPU Tahiti XT chipset. Its diversity from the other Radeon HD 7970 can be seen with the naked eye, instead of an air cooler practically the entire surface of the PCB is covered with waterblock brand EK. It differs markedly from the original version, since it is designed specifically for the MSI R7970 Lightning model. Relation of adapter to the Lightning series is easily determined by the inscription at the interface connector PCI-E 3.0 x16, as well as non-standard set of video outputs (2x DVI, 4x Mini DisplayPort) and configuration of additional power connectors (2x PCI-E Power 8-pin).



Obviously, the accelerator is positioned as the Radeon HD 7970 GHz Edition and has a nominal frequency of at least 1050 MHz. Will MSI risk, like Sapphire did, and provide the card with 6 GB of memory? Probably not. The «advanced» composition of the printed circuit board and water block of full coverage …

ASRock Fatal1ty Z87 Killer: Motherboard for Fastidious Gamers and Overclockers

Hardware solutions from Fatal1ty series have been enjoying great popularity among gamers and overclockers since the first product came out. ASRock continues gladdening its fastidious devotees by introducing one more representative of Fatal1ty series – motherboard Fatal1ty Z87 Killer. It attracts potential customers by a powerful VRM system, prime-quality hardware base, and the implementation of KillerLane 2200 network chip that eliminates lags in online games.



ASRock Fatal1ty Z87 Killer is designed in ATX form-factor and is based on Intel Z87 chipset, targeted Intel Haswell processors (Core i3/i5/i7, Celeron, Pentium) for Socket LGA1150 platform. Memory subsystem supports up to 32 GB of two-channel DDR3 memory chips that run at the maximal 3050 MHz frequency. Power subsystem is organized according to 8-phase scheme; it consists of special MOSFET-transistors that are characterized by a low TDP level.


To continue, this motherboard accommodates three high-speed PCIe 3.0 x16 …
Get computer-assisted driver search with our brand utility *
Start
* The Utility doesn't need to be installed. DevID Agent can be easily run, it will found out
which devices need to install or update drivers.
The Utility doesn't contain viruses or malicious code

TOSHIBA Portable PC

  • BATTERY
  • COMPUTER
  • DISKDRIVE
  • DISPLAY
  • HDC
  • HIDCLASS
  • KEYBOARD
  • MEDIA
  • MONITOR
  • MOUSE
  • NET
  • PCMCIA
  • PORTS
  • PROCESSOR
  • SYSTEM
  • UNKNOWN
  • USB
  • VOLUME