Motherboard Gigabyte G1.Sniper 3 Review

The development of motherboard segment was always characterized by experiments and competition. In earlier times manufacturers tried to differentiate their products by color and delivery set configurations. Nowadays the conjuncture seems to be quite similar, although contemporary technological approaches presuppose the development of motherboards from scratch, while the remnants from the past used ready-made base. Motherboard Gigabyte G1.Sniper 3 belongs to the generation of exclusive products with solid and high-end components, as well as original design.



Design and Framework


Gigabyte G1.Sniper 3 design is differentiated by the predominance of dark colors, but due to the bright-green radiator embedding, PEG-slots and memory slots coloring, the motherboard looks brisk. Enlarged dimensions are considered to be the major distinction of this motherboard from other products. This model is developed in XL-ATX form-factor that can be compatible only with full-tower casings. The …

BenQ Promotes a New PC Monitor with 1 ms Response Time

BenQ, a Taiwanese developer of diversified PC equipment, promotes its new monitor that will be released later this year. Codenamed RL2455HM, the model replenishes 'RL' gaming series and is primarily intended for the connection with gaming consoles. Thus, it might become a perfect tool for the devotees of dynamic shooters and other console games.



BenQ RL2455HM features 24-inch display and 16:9 aspect ratio. It is characterized by Full HD resolution (1920x1080), 60 Hz scanning, wide viewing angles (170 degrees vertical, 160 degrees horizontal), and high dynamic contrast ratio that achieves 12 million to 1 index. This monitor employs TN panel but can boast quite an outstanding response time: on gray-to-gray switch, array response time equals to 1 ms only. This is a dramatic breakthrough, if compared with the majority of other gaming displays that demonstrate from 4 to 7 ms time.


Still, interface panel is not rich on I/O ports: it is represented by a couple of HDMI ports and …

Next year TSMC will start manufacturing the first 20nm chips

The Taiwanese company TSMC confirmed its intention to start production of chips using 20 nm technological processes in 2013. However, for now the company does not plan its production on an industrial scale and will release the first chips in a limited quantities, giving them a total of 1% of production capacity. According to the head of the company, the mass production of semiconductor chips with this technology will not begin until 2014.



Meanwhile TSMC Company is going to produce only one version of the chip, which will be able to enter into the wide range of devices, from smart phones with low-power to high-performance graphics cards. For comparison, the Taiwanese company currently has four different output chips on 28-nm technology. These are 28LP (poly / SiON) for low-power low-cost chips, 28HPL (HKMG) for use in low power applications, 28HP (HKMG) for high-performance chips and 28HPM (HKMG). The latest version combines elements of high-performance chips with high efficiency …
Get computer-assisted driver search with our brand utility *
Start
* The Utility doesn't need to be installed. DevID Agent can be easily run, it will found out
which devices need to install or update drivers.
The Utility doesn't contain viruses or malicious code

Gateway E-4000 based on Intel Corporation D845GRG

  • COMPUTER
  • FDC
  • FLOPPYDISK
  • HDC
  • MEDIA
  • NET
  • PORTS
  • PROCESSOR
  • SYSTEM
  • USB
  • VOLUME