Biostar Intros Hi-Fi A85W 3D Motherboard with a Bunch of Useful Features

Biostar, has recently introduced a new Hi-Fi A85W 3D motherboard, intended to support APUs from AMD for Socket FM2 (Richland and Trinity generation APUs). The board is developed in ATX form-factor and features four DIMM slots for DDR3 memory modules. Expansion facilities are guaranteed by two PCI slots, two PCI Express x16 2.0 slots, and PCI Express x1 2.0 slots, while connectivity options are secured by eight SATA III ports with the support of various RAID configurations (RAID 0, 1, 5, 10). The model also boasts three video sockets (VGA, DVI and HDMI) and USB 3.0 ports.



Biostar Hi-Fi A85W 3D is able to offer customers a lot of useful features. Hence, it employs 24-bit sampling that ensures the production of utmost sounding via analogue interface, while connecting with home theaters, multi-channel acoustic systems and high-efficiency headphones. Multi-channel Calibration (MCC) technology allows for the adjusting of an optimal sound environment on different spacing. With the …

Greeting New PC Chassis ME880 from Delux

Delux Technology, a well-established manufacturer of PC hardware and peripherals, starts selling its new PC chassis, intended for budget-oriented gamers. Entitled Delux ME880, the model corresponds to ATX form-factor and features 410x192x435 mm dimensions. It supports all motherboards of ATX and micro-ATX standard, as well as a wide range of graphics solutions, due to the availability of seven PCI-slots in the rear section of the case. In order to meet some customers’ design requirements, this chassis will be available in three color variations: white, black and red.



ME880 is equipped with four external bays for the mounting of 5.25-inch drives. These bays, along with the bottom and side panels, are covered by a grid-like lid that ensures optimal ventilation and cooling down of all critical components. The internal layout presupposes PSU to be installed in the bottom part of the chassis; this positively affects cable management process, providing for a hassle-free access …

Company XFX is preparing Radeon HD 7970 GE with Double Dissipation cooler

American vendor XFX is about two weeks to release a Radeon 7970 Edition Double Dissipation (model code — FX-797G-TDF). It combines the capabilities of GPU Tahiti XT2 with a higher overclocking potential and the TDP, rather than at Tahiti XT, PCB reference design, but without a single phase power supply (6 +1), and the cooling system in the vaporizing chamber, an array of aluminum fins, PA plate (the same heatsink for the VRM and memory), as well as the two fans standard size 90 mm.



New model will get the recommended for the Radeon HD 7970 GE frequency ratio 1000/6000 MHz for core and chips GDDR5. The graphics chip will operate at 1050 MHz in the load. Recall that the “usual” HD 7970 was limited to regular frequencies 925/5500 MHz and did not support dynamic overclocking.


The configuration of video outputs is almost standard: from the five of DVI-I, DVI-D, HDMI and 2x Mini DisplayPort for some reason excluded DVI-D. The additional power is supplied by one 8-pin and one …
Get computer-assisted driver seach with our brand utility *
Start
* The Utility doesn't need to be installed. DevID Agent can be easily run, it will found out
which devices need to install or update drivers.
The Utility doesn't contain viruses or malicious code

Acer, inc. Aspire 5050 based on Acer, Inc. Prespa M

  • BATTERY
  • COMPUTER
  • DISPLAY
  • HDC
  • KEYBOARD
  • MEDIA
  • MODEM
  • MOUSE
  • NET
  • PCMCIA
  • PROCESSOR
  • SCSIADAPTER
  • SDHOST
  • SYSTEM
  • USB
  • VOLUME