Buffalo Announces HD-PCFU3-C Wearables

Buffalo Technology is about to release its newest line of wearable hard drives. Codenamed HD-PCFU3-C, the products will be available in three capacity versions: 500 GB, 1 TB, and 2 TB. All of them allow as pure black so pure white exterior design. The models will be backed by 1 year limited warranty.



The Buffalo HD-PCFU3-C external HDs are housed in solid aluminum cases and equipped with a high-speed USB 3.0 interface. The latter might be used both for data transfer as well as charge-in purposes; put it otherwise, the user will be saved from the necessity to buy an additional AC adaptor.


Pricewise, the cheapest solutions are 500 GB HD-PCF500U3-BC and HD-PCF500U3-WC with the price tag of $90. The HD-PCF1.0U3-BWC and HD-PCF1.0U3-BBC of 1 TB capacity will cost about $110, whereas their senior companions, the PCF2.0U3-GBC and HD-PCF2.0U3-GWC of 2 TB capacity, will go as high as $165. Shipping is to start in early January 2015.

Abee Launches One More Case for Mini-ITX Motherboards

Abee, a designer and supplier of high-end PC chassis, supplements its product line with one more PC case series intended specifically for mini-ITX motherboards. Codenamed Acubic C10R, the series counts five models of different coloring: casual white, black, silver, and eye-catching blue and red. All models feature futuristic cubic design with rather compact dimensions of 239x229x229 mm.



Acubic C10R is characterized by a strict design combined with elegance and grace. Its frontal panel houses a couple of USB 3.0 sockets, Power button, audio slots (for headphones and a microphone), and LED indicators for Power button and HDD activity. The panel itself is covered by a transparent acryl.


Despite its compact dimensions, this case is ready to accommodate expansion PCI Express and graphics cards of up to 190 mm in length. The maximal height of CPU cooling system should not exceed the top 55 mm; this will be quite sufficient for the integration of low-noise and low-profile …

First SSDs from Asus to be Released Already in May

First seen at CES 2013 exhibition, Asus ROG RAIDR solid-state drives are on their final stage of development before an official release in May. Unlike the majority of contemporary SSD solutions in the market, the product from Asus features quite distinct form-factor, similar to expansion cards. The new drive is known to employ PCI Express 2.0 x2 interface with the support of x16/x8/x4 slots.



According to the preliminary data, ROG RAIDR solid-state drives will be available in two capacity variations – 120 GB and 240 GB. Both models will run under a couple of SandForce SF2281 controllers, comprised into RAID 0 array. MLC NAND flash-memory chips from Toshiba (designed under 19 nm technological process) will be the heart of revolutionary SSDs. Irrespective of the overall differentiation, ROG RAIDR will support a range of technologies traditional SSDs support, including S.M.A.R.T., TRIM and NCQ.


With the respect to the performance, both drives will be able to demonstrate …
Get computer-assisted driver search with our brand utility *
Start
* The Utility doesn't need to be installed. DevID Agent can be easily run, it will found out
which devices need to install or update drivers.
The Utility doesn't contain viruses or malicious code

Sony Corporation VGN-FE770G based on Sony Corporation VAIO

  • 1394
  • BATTERY
  • COMPUTER
  • DISPLAY
  • HDC
  • HIDCLASS
  • KEYBOARD
  • MEDIA
  • MODEM
  • MOUSE
  • MTD
  • NET
  • PCMCIA
  • SYSTEM
  • USB
  • VOLUME