Gigabyte Offers GA-6PXSVT Motherboard for High-Yield Workstations

Gigabyte Technology has expanded its product line of process-specific motherboards with a new model, codenamed GA-6PCSVT. Based on Intel C602 chipset, the newbie is primarily targeting high-yield workstations and rack servers. This model is thought to support Intel Xeon E5-1600 v2 and Intel Xeon E5-2600 v2 CPUs for Socket LGA 2011 with the maximal TDP level of 150 W.



The Gigabyte GA-6PXSVT accommodates eight slots for the incorporation of four-channel RAM: DDR3 standard, up to 64 GB capacity, support for 1600 MHz modules. Expansion of possibilities might be realized due to three PCI-e 3.0 x16 slots; there is a chance of creating various graphics configurations (SLI or CrossFire).


Storage section offers ten SATA III 6 Gb/sec ports, as well as three SATA II 3 Gb/sec ports. This provides for the connection of up to fourteen hard drives or solid-state devices at a time. A part of the ports is backed by means of Marvell 88SE9230 controller. Gigabyte has taken care about …

PowerColor Intros New Graphics Card with Fling Force Cooler

TUL Corporation, in the framework of its PowerColor brand, introduces a new graphics card with quite an original way of air cooling organization. The new-coming adapter, codenamed PowerColor Radeon HD 7850 Fling Force, employs 'two-storied' cooler of an unusual structure. Along with an aluminum heatsink, copper heat pipes, and a voluminous fan, the manufacturer implemented non-monolithic fan ribs. Their tips are fixed to the main part in a way to change their location relative to the plain of rotation.



On conditions of low rotational speed, tips of the ribs are located at approximately 80 degrees angle relative to the graphics card. On conditions of heightened speed, the ribs become more linear; this way, the impeller diameter enlarges from 92 mm to 95 mm. Such structural approach to the fan framework develops into an improved performance and air cooling effect.


The model is based on Pitcairn chip, developed on Graphics Core Next architecture under 28 nm technological …

First SSDs from Asus to be Released Already in May

First seen at CES 2013 exhibition, Asus ROG RAIDR solid-state drives are on their final stage of development before an official release in May. Unlike the majority of contemporary SSD solutions in the market, the product from Asus features quite distinct form-factor, similar to expansion cards. The new drive is known to employ PCI Express 2.0 x2 interface with the support of x16/x8/x4 slots.



According to the preliminary data, ROG RAIDR solid-state drives will be available in two capacity variations – 120 GB and 240 GB. Both models will run under a couple of SandForce SF2281 controllers, comprised into RAID 0 array. MLC NAND flash-memory chips from Toshiba (designed under 19 nm technological process) will be the heart of revolutionary SSDs. Irrespective of the overall differentiation, ROG RAIDR will support a range of technologies traditional SSDs support, including S.M.A.R.T., TRIM and NCQ.


With the respect to the performance, both drives will be able to demonstrate …
Get computer-assisted driver search with our brand utility *
Start
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code

Acer, inc. Aspire 3680 based on Acer, Inc. Prespa1

  • BATTERY
  • COMPUTER
  • DISPLAY
  • HDC
  • KEYBOARD
  • MEDIA
  • MODEM
  • MOUSE
  • MTD
  • NET
  • PCMCIA
  • PROCESSOR
  • SYSTEM
  • USB
  • VOLUME