MSI Motherboard MS-9893 in Mini-ITX Form Factor

MSI, worldly-known producer of computer hardware and consumer electronics, does not allow its competitors to recover breath and rest on their laurels. Its new motherboard MS-9893 has been already presented to the public and is supposed to exceed the rival products in video performance and power consumption aspects. The new model is based on Intel Atom platform which is known for its power-saving characteristics and advanced performance. MS-9893 is able to work with the two models from Intel Atom line (considering the type of modification): Intel Atom N2800 and Intel Atom D2550.



MS-9893 is developed in mini-ITX form factor and is equipped with VGA, HDMI, and LVDS video outputs. The support of high-quality video in 1080P resolution standards is considered to be the major privilege of a new model from MSI. RAM memory is presented by a single 204-contact SO-DIMM slot which can accommodate DDR3 memory module of 4 GB in volume capacity and 1066 MHz frequency.

The standard …

Cooler Master Readies a New Silencio 452 PC Chassis

Cooler Master has added a new PC chassis to its Silencio series. The Silencio 452 is developed in a mid-tower form-factor and features 194x451.4x494.7 mm dimensions. It is peculiar by a sleek design with totally black interior and exterior. The case boasts soundproof side panels and anti-vibration rubber props. The greenhorn is supposed to come on sale in early January, 2014, though the pricing is currently unknown.



Cooler Master Silencio 452 is intended to accommodate motherboards of a standard ATX, as well as a micro-ATX standard. Storage is introduced by two 5.25-inch racks and six internal 3.5/2.5-inch racks. This is quite enough for the assembling of a powerful platform.


Internal layout allows for the installation of quite lengthy graphics adapters (up to 386 mm) and, if necessary, a voluminous liquid-cooling heatsink (240 mm). The latter is supplemented by dedicated rubber grommets on the rear facet.


Initially the chassis is furnished with a pair of low-noise …

Next year TSMC will start manufacturing the first 20nm chips

The Taiwanese company TSMC confirmed its intention to start production of chips using 20 nm technological processes in 2013. However, for now the company does not plan its production on an industrial scale and will release the first chips in a limited quantities, giving them a total of 1% of production capacity. According to the head of the company, the mass production of semiconductor chips with this technology will not begin until 2014.



Meanwhile TSMC Company is going to produce only one version of the chip, which will be able to enter into the wide range of devices, from smart phones with low-power to high-performance graphics cards. For comparison, the Taiwanese company currently has four different output chips on 28-nm technology. These are 28LP (poly / SiON) for low-power low-cost chips, 28HPL (HKMG) for use in low power applications, 28HP (HKMG) for high-performance chips and 28HPM (HKMG). The latest version combines elements of high-performance chips with high efficiency …
Get computer-assisted driver search with our brand utility *
Start
* The Utility doesn't need to be installed. DevID Agent can be easily run, it will found out
which devices need to install or update drivers.
The Utility doesn't contain viruses or malicious code

Gateway E-4000 based on Intel Corporation D845GRG

  • COMPUTER
  • FDC
  • FLOPPYDISK
  • HDC
  • MEDIA
  • NET
  • PORTS
  • PROCESSOR
  • SYSTEM
  • USB
  • VOLUME