PC Cases Enermax iVektor to Be Launched in Late August

Enermax is going to release its new iVektor series of PC cases already in late August. First seen at Computex 2013, these products draw prime attention due to unusual design and voluminous internal layout. The series counts three models that are differentiated by color: white version – Enermax iVektor (ECA3310A-W), black version – Enermax iVektor (ECA3310A-B), and red version – Enermax iVektor (ECA3310B-R). They are destined to be employed as the basis for the assembling of various system configurations.

All iVektor representatives are developed in midi-tower form-factor, featuring steel and plastic chassis. The cases support ATX/micro-ATX motherboards and seven expansion slots. Internal layout presupposes the incorporation of three 5.25-inch optical drives, as well as seven 3.5-inch drives. The height of a supported power supply unit might not exceed 179 mm.

When the user fills all seven bays for 3.5-inch drives, the maximal admissible length of graphics adapters makes up 290 mm; in case only three bays are taken by such drives and other four are taken by 2.5-inch items, it’s possible to use more lengthy solutions – up to 322 mm. Moreover, if the user decides to remove the central bay for four drives, he’ll be able to integrate the cards of up to 415 mm in length.

The frontal I/O panel accommodates a pair of standard audio sockets and four USB ports (USB 3.0 x2, USB 2.0 x2). Here one will also find a special controller that regulates fan rotational speed. As for the cooling system, it is introduced by two pre-installed 120 mm fans. In addition, it’s feasible to install one more frontal fan, two 120 mm fans at the top section, one 120 mm fan at the base, and one 240 mm liquid-cooling heatsink at the top.

Some other peculiarities found in Enermax iVektor chassis are listed below:
— the availability of a brand SlideIn mounting technology for optical drives;
— the employment of Soft-Touch exterior coverage;
— the availability of anti-vibration rubber pads in drive bays;
— the availability of a dedicated notch for hassle-free mounting of CPU cooler backplate;
— the availability of changeable filter under PSU location bay;
— the availability of 30 mm spacing over the motherboard tray for a professional cable management.