Search for drivers by ID or device name

Known devices: 165022367

Latest known driver: 23.12.2020

Ad

Новости devid.info

FSP Intros ‘Noiseless’ PSU Model Aurum Xilenser 500

FSP, a renowned developer and supplier of power supply units, introduces a new product that is widely recognized as ‘noiseless’ PSU. Codenamed FSP Aurum Xilenser 500 (AU-500FLD), it employs a passive cooling system instead of an air cooler, thus its dump operation is easily explainable. The unit also characterizes by a startling efficiency which provided for the acceptance of 80+ Gold certificate.

Aurum Xilenser 500 takes similar to Aurum Pro/CM models design with a totally black casing and a comb-like top grid enclosed in a golden stripe. The model is able to operate at the nominal 500W power and support the latest ATX12V/EPS12V standards. It should be noted that this unit utilizes a standard framework with all power connectors soldered on the printed circuit board. A set of connectors involves five SATA connectors, a single 4-contact FDD, four 4-contact Molex, and a pair of 6+2-contact PCI Express connectors. Naturally, it contains two main 24-contact and 4+4-contact cables.

The unit is capable to operate at 110V-240V input voltage. Besides, it is equipped with a few security technologies (OCP, SCP, OVP) that save it from interruptions or malfunctions while operating.

Gifted with 80+ Gold certificate, FSP Aurum Xilenser 500 demonstrates not less than 88% efficiency. Its average operational term is estimated for one hundred thousand hours. Hence, its commodities will be quite sufficient to supply power to a high-efficiency system with four-core Intel Ivy Bridge processor and middle-class graphics adapter from AMD or Nvidia.
  • 0
  • 20 February 2013, 15:06
Only registered users can comment.