Meeting New Chassis Sugo SG10 from SilverStone

SilverStone Technology, a celebrated Taiwanese PC hardware manufacturer, is going to release at the end of the current month its new mini-tower chassis codenamed SG10 that joined the SilverStone Sugo series. Featuring 354x295x220 mm dimensions, the novice is housed in a case made of stainless steel (totally black exterior and interior) with an aluminum frontal facet. The latter comprises a ventilation slot, covered by an anti-dust grid.



First of all, it should be noted that Sugo SG10 is predestined specifically for the assembling of small-sized but rather high-performance PC systems. The chassis is compatible with motherboards of mini-ITX/micro-ATX standard and is ready to welcome graphics adapters of up to 338 mm (length), PSUs of 180 mm (length), as well as CPU coolers of up to 165 mm (height). One of its key peculiarities is the localization of the power supply unit at the frontal part of the case, if compared with the majority of contemporary solutions with PSU bays at the …

Akasa Intros a Small-Sized AK-CC1101EP02 CPU Cooler

Following the release of a low-profile cooler, codenamed AK-CC7122EP01, Akasa is glad to introduce one more small-sized item. The AK-CC1101EP02 features 80x80x28.3 mm dimensions and is predestined to be employed as a part of a compact system within mini-ITX/micro-ATX chassis. The model is compatible with AMD FM1/FM2/754/939/AM2(+)/AM3(+) sockets only.



Akasa AK-CC1101EP02 involves an aluminum heatsink with cam-lever clip installation type, a thermal compound on the base, and a 80 mm fan. The latter is based on EBR bearing and equipped with PWM technology that adjusts the rotational speed from the minimal 600 RPM to the maximal 3000 RPM.


Its efficiency achieves 26.53 CFM, producing up to 27 dB noise. The estimated time of fail-proof operation equals to 40.000 hours. The fan is adjoined to the motherboard via a 4-pin connector and receives voltage power via 12VDC bus.


Just for comparison means, the predecessor — AK-CC7122EP01 – features 85.2x87.2x26 mm dimensions. …

Enermax Outs High-Flown Twister Pressure Fan

One of the major requirements for an efficient CPU cooler is a high static pressure. The higher this index is, the more productive the blades are. Quite the contrary, the main requirement for a system fan is a volume of produced airflow, since it affects the air circulation within the case. Taking into account those facts, Enermax decided to elaborate a fan that would unite both demands. That is how Twister Pressure fan came into the market.



Enermax Twister Pressure is a high-efficiency fan targeting to be implementing within CPU cooling solutions. It is based on Twister Bearing 2, which framework has been optimized for a reliable operation under unfavorable thermal conditions (up to 85 degrees) and under high dust content. The second version of Twister Bearing is supposed to run over 160.000 hours in fail-proof mode; this is 60% more than the initial version could perform.


To continue, this fan offers three operational modes: Performance, Silent and Ultra Silent. All of …
AUTOMATIC SEARCH & INSTALL
device drivers
Freeware
Download (9MB)
DevID agent v4.38
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 19 April 2012, 21:37
Last visit: 19 April 2012, 21:37