MSI is preparing new model - Radeon HD 7970 with a water-block

The well-known in IT-maker Company MSI announced about appearance of new videoadapter based on GPU Tahiti XT chipset. Its diversity from the other Radeon HD 7970 can be seen with the naked eye, instead of an air cooler practically the entire surface of the PCB is covered with waterblock brand EK. It differs markedly from the original version, since it is designed specifically for the MSI R7970 Lightning model. Relation of adapter to the Lightning series is easily determined by the inscription at the interface connector PCI-E 3.0 x16, as well as non-standard set of video outputs (2x DVI, 4x Mini DisplayPort) and configuration of additional power connectors (2x PCI-E Power 8-pin).



Obviously, the accelerator is positioned as the Radeon HD 7970 GHz Edition and has a nominal frequency of at least 1050 MHz. Will MSI risk, like Sapphire did, and provide the card with 6 GB of memory? Probably not. The «advanced» composition of the printed circuit board and water block of full coverage …

EK Water Blocks to Pass Out EK-CoolStream WE Heatsinks

EK Water Blocks, a renowned manufacturer of enthusiast-level waterblocks, is about to vend its newest series of heatsinks. Codenamed EK-CoolStream WE, the new-comers feature Circle SQuare (CSQ) design that shows compatibility with practically all water/liquid-cooling systems. They employ high-quality copper pipes and fins, as well as brass alloy enclosures which provide for an adequate cooling of entrusted components.



EK-CoolStream WE heatsinks are ready to welcome additional fans of 180x180x25 mm dimensions. Most notably, the company recommends using EK-FAN 180 PWM fan based on a fluid-dynamic bearing, estimated for 30.000 hours of foolproof operation. This model operates at 500-900 RPM, ensuring sufficient airflow thanks to the well-trimmed blades. The installation of fittings is possible due to the availability of G ¼ thread.


Pricing depends on the delivery kit. Therefore, a unitary heatsink of 180 mm costs 61.95 EUR, dual heatsink of 360 mm comes at 84.95 EUR, and …

ASRock Debuts with a Couple of E3V5 Mainboards

Following the success of Intel Xeon E3-1200 v5 CPUs, ASRock decided to launch a couple of compatible ATX motherboards. The Fatal1ty E3V5 Performance Gaming/OC and E3V5 WS models both feature Intel C232 chipset. The first new-comer is targeting gamers, while the other one is called to satisfy the needs of fastidious enthusiasts.



ASRock Fatal1ty E3V5 Performance Gaming/OC comes equipped with 4 DIMM slots which support DDR4-2133 MHz memory modules. The inventory also includes Super Alloy design as well as Gaming Armor, Hyper BCLK Engine, F-Stream, Key Master, DDR4 Non-Z OC technologies.


ASRock E3V5 WS accommodates six SATA III ports, a pair of PCIe 3.0 x16 expansion slots, 8-channel Realtek ALC892 audio, Intel I219LM gigabit Ethernet controller, and a variety of external interfaces: four USB 3.0 ports, two USB 2.0 ports, two PS/2, one RJ-45, and three audio ports.


The only drawback of both motherboards is absence of video ports. Thus, it’s vital to complement them with …
AUTOMATIC SEARCH & INSTALL
device drivers
Freeware
Download (9MB)
DevID agent v4.37
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Gender: Female
Date of birth: 24 July 1969
Location: Российская Федерация, Барнаул
Registered at: 28 October 2011, 10:50
Last visit: 28 October 2011, 10:56