Zalman Introduces Three New Fan Series for PC Cases

Zalman, a highly-acclaimed designer of miscellaneous hardware pieces, has elaborated three completely new series of low-noise fans: ZM-FDB(SF), ZM-LED(SF) and ZM-Plus(SF). The ‘triple’ embraces the models of 80 mm, 92 mm and 120 mm dimensions. The fans do not support PWM technology, thus feature a stable rotational speed. The most peculiar feature is low noise level (not more than 23 dB), despite the range of speed.



Zalman ZM-FDB(SF) are characterized by the implementation of high-quality fluid-dynamic bearings. Their lifespan is estimated as 150.000 hours. The other two fan series – Zalman ZM-LED(SF) and Zalman ZM-Plus(SF) — involve long-life bearings, which are thought to be quite reliable and effective. Their framework features dust-repelling mechanisms and this promotes for the elongated lifespan.


Certainly, the ‘triple’ enjoys similar features. For instance, all the fans employ an original Shark Fin blades design. It allows for the decrease of airflow …

MSI Announces Z170A PC Mate Mainboard

MSI has recently habituated to launching ever newer and more efficient mainboards. This time the company unveils Z170A PC Mate full ATX model that draws power via 24-pin ATX and 8-pin EPS sockets. It is based on Intel Z170 chipset and is estimated for Intel Core LGA1151 (Skylake) CPUs. The core cooperates closely with DDR4 3300 MHz memory (4 slots are available, two-channel mode), the maximal volume of which might achieve 64 GB.



MSI Z170A PC Mate comes equipped with 6-phase VRM system. The model is rich in expansion facilities: it offers one PCI Express 3.0 x16, one PCI Express 3.0 x4, three PCI Express 3.0 x1, and a pair of PCI slots. The connection of drives is realized due to 1x M.2 slot 32 Gb/sec, 1x SATA Express 16 Gb/sec, and 6x SATA III 6 Gb/sec.


As far as interfaces are concerned, this motherboard houses six USB 3.0 ports, four USB 2.0 ports, a couple of USB 3.1 ports, as well as three different video ports: HDMI 2.0, D-Sub and DVI. Besides, network connection …

ID-Cooling Hunter Duet II Liquid Cooling System

ID-Cooling, being famous for its cooling systems, has released a Hunter Duet II cooler of large dimensions, which is supposed to transfer heat from the CPU and the graphics engine surfaces. This model is designed with a 360 mm heat sink, which is of great benefit to its efficiency factor.



The construction includes two water units with a base out of copper and built-in pumps, pipes in braided cable, the three-section aluminum 395 × 120 × 27 mm heat sink, three 120 mm fans, and an extraordinary framework with a 90 mm fan to blow over graphics card load-bearing elements and intensive plates for the CPU and GPU.


Though possessing similar construction, water units differ in lids design and the location of holes for liquid flow. At the moment their inner structure details are not available.

A compact fan to blow over VRM consumes 1.2 W. Its rotary speed is not higher than 1,500 rpm. The same ratio of each of the three main fans is not supposed to exceed 1,500–2,000 rpm.

AUTOMATIC SEARCH & INSTALL
device drivers
Freeware
Download (9MB)
DevID agent v4.37
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 01 June 2012, 20:11
Last visit: 01 June 2012, 20:22