Deepcool to Release Neptwin V2 CPU Cooler

Deepcool Industries Co. LTD has enriched its production line with a new CPU cooler, entitled Neptwin V2. Featuring 125x136x159 mm dimensions, the model allows for the installation of up to four fans, combined with a nickel-plated base, six copper heat pipes and a two-section voluminous heatsink which consists of 80 ribs (40 ribs for each section).

This cooler is known to support all up-to-date platforms, developed by Intel and AMD. As distinct from the majority of rivals, the Neptwin V2 framework is ready to accept four fans which operate by means of PWM technology. The base version comes with only two fans. The first one – Deepcool Wind Blade 120 – is equipped with a blue backlight; its rotational speed range varies from 900 to 1500 RPM. The second fan rotates at 1300 RPM. An overall noise level fluctuates within 21.4-32.1 dB boundaries.

It should be mentioned that total airflow volume produced by the fans might achieve 110.8-237.15 m/h. As a result, the cooler is …

Sapphire Launches Nitro R9 Fury 4G HBM Graphics Card

Sapphire, a well-known manufacturer of top-notch graphics solutions, is glad to announce the launch of a new high-performance video card, entitled Nitro R9 Fury 4G HBM. The greenhorn is available in two modifications which differ by GPU clocks (AMD Radeon R9 Fury). The first version offers 1050 MHz frequency, while the second version runs at 1020 MHz frequency. As a reminder, the etalon Fiji Pro GPU operates at 1000 MHz.

Sapphire Nitro R9 Fury 4G HBM rests upon an improved PCB with an enforced VRM and high-quality hardware base. The card employs 4 GB of GDDR5 memory with 512-bit bandwidth. The list of integrated interfaces consists of three DisplayPort connectors, one HDMI port and one DVI-D port. Moreover, the model is shipped with a proprietary Sapphire TriXX utility that allows for fine tuning of all key parameters.

As distinct from the etalon model, the modified graphics card from Sapphire boasts Tri-X cooler. It embraces three fans on ball bearings and 10-mm …

Asus to Start Shipping Radeon R9 290 DirectCU II OC Graphics Card

Next week Asus is going to start shipping its newest graphics card from Radeon R9 series. Codenamed Radeon R9 290 DirectCU II OC, it is based on an original PCB with black-and-red design and the incorporation of an exclusive DirectCU II cooling system. Plus, the availability of ‘OC’ in the codename implies the availability of factory overclocking.

Asus Radeon R9 290 DirectCU II OC takes GCN Hawaii core with 2816 stream processors as the basis. It operates at an overclocked 1000 MHz frequency. The model is equipped with 4 GB of GDDR5 memory (512-bit bus) that runs at an effective 5400 MHz frequency. Just for a comparison, etalon adapter from AMD runs at 947 MHz/ 5000 MHz for GPU/memory correspondingly.

DirectCU II cooler consists of a heatsink, four copper nickel-plated heatpipes (two of them feature 10 mm dimensions), and two high-performance fans: one ordinary and one CoolTech. The card receives power via 6+8-pin connectors and might require not less than 600 W PSU.
Get computer-assisted driver search with our brand utility *
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 12 November 2011, 14:07
Last visit: 25 November 2011, 21:09