King’s on the Footprint: Nvidia Boasts Titan X Adapter

The much-anticipated release of Nvidia’s GeForce GTX Titan X graphics adapter has already come true. The new-comer employs the latest flagship GM200 GPU (Nvidia Maxwell architecture) that comprises 8 billion transistors, 24 SMM blocks (each includes 128 CUDA cores and 8 TMUs). As a result, the GPU consists of 3072 CUDA cores and 192 TMUs – a record-breaking layout. The amount of ROPs makes up 96.

Nvidia GeForce GTX Titan X runs at 1000 MHz nominal frequency but might be overclocked to 1075 MHz frequency. Memory subsystem is compiled of 12 GB of GDDR5 modules which operate at 7010 MHz frequency. The bandwidth index of 384-bit bus approximates 336.5 Gb/sec. Consequently, an overall computation power is estimated at 7.0 TFLOPS.

Cooling is organized with the assistance of a two-slot cooler with a single fan. Connectivity facilities include three video ports: DisplayPort, DVI-I and HDMI. On active mode, the maximum allowed GPU temperature should not exceed 92 C. The utmost …

Chieftec Navitas Gets a 450-Watt Update

First launched in 2013, Chieftec Navitas series of PSUs included five high-efficiency models of up to 1250 W power. This year the company has introduced four new editions to the family which are characterized by low power: 450 W, 550 W, 650 W, and 750 W. This update is called to satisfy the needs of unpretentious customers who require stability rather than records.

New Chieftec Navitas power supply units come equipped with a single +12V bus that covers 100% power. Hence, it’s possible to integrate the models into the latest system configurations. All of them correspond to 80 Plus Gold standard, achieving up to 87% efficiency in a wide range of operational conditions.

Their other peculiarities involve a fully modular cable system, the availability of a low-noise 120 mm fan, the support for Active PFC technology and all known protection features (i.e. OPP, OTP, UVP, OVP, SCP).

To continue, Chieftec Navitas GPM-450S ensures 450-watt power on +12V rail & up to …

Aerocool Intros Dead Silence System Fans

Aerocool Advanced Technologies is going to launch a new lineup of 140/120 mm system fans, entitled Dead Silence. As seen from the title, the products are distinguished by absolutely noiseless operation. However, this is not the only attraction. The lineup is introduced by bicolor models with black frames and white/blue/red/black mounting components. Four onboard LED backlight add to the fans’ aesthetic effect.

All the fans are designed on a hydrodynamic bearing that is able to run approximately 100.000 hours on end. All of them are connected to the motherboard by means of a 3-pin connector. The blades are made of two different materials (rubber and plastic), whereas their reverse side features a dedicated Fish-eye design. It provides for the minimization of turbulence. Moreover, four rubber clamps on the frame’s edges terminate the vibration and noise.

To proceed with the peculiarities, Aerocool Dead Silence fans of 120 mm dimensional type rotate at the maximal 1200 …
Get computer-assisted driver search with our brand utility *
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 17 September 2012, 20:07
Last visit: 20 January 2013, 20:28