Aerocool to Advance Project 7-Chassis 1

Aerocool has just announced the release of a new stylish chassis, codenamed Project 7-Chassis 1. The greenhorn is distinguished not only by a catchy exterior but also by a spacious interior. The case houses a side window, made of a tempered glass, as well as a LED backlight on the front panel; the latter is regulated by means of dedicated buttons on the top facet.



Featuring 550x446.4x244.6 mm dimensions, Aerocool Project 7-Chassis 1 is ready to welcome motherboards of mini-ITX/micro-ATX/ATX format with up to 7 expansion slots. There are six slots in total for the mounting of drives: a pair of 3.5-inch bays and four 2.5-inch items. The layout allows for the integration of a 165-mm high CPU cooler and a 400-mm long video card (+ a standard ATX PSU).


The model comes equipped with a single pre-installed 120-mm fan on the rear plate. There is a possibility to enhance cooling with the help of five additional fans, mounted on the front and top panels. The user is able to manage …

The Paean Dual-Compartment Chassis with Tempered Glass by Raijintek

Recently Raijintek has produced a new product – a Dual-Compartment Chassis with Tempered Glass called Paean. Its awesome design features an aluminum dual section open frame/bench table ATX chassis and is constructed by 4 mm hair-silk Alu. dense base plate.



This wonderful creation of the Raijintek company offers its clients an extraordinary and up-to-date design with a dual chamber (CPU, MB and VGA are positioned at the front part with water cooling units, other elements are conveniently located on the back panel) and best cable arrangement. Dual side tempered glass makes it possible to see the inward.


One can place Paean in several ways – on a desk or as a bench table. PAEAN is compatible with 240/280/360 mm radiators and 6 HDD's / SSD's. Among other advantages of this framework is a fast setup due to its tool-free installations and renewable hardware, a maximum VGA length – 310 mm and a maximum PSU length – 200 mm.

Specification:

• 5.0 mm tempered glass and …

The New Fan from Antec – Rainbow 120 RGB – Will Be Available at the Price of 15 EUR

The range of Antec chassis fans has been widened by the Rainbow 120 RGB model. Its name suggests, that this product is of 120 mm typical size. LED backlighting of Rainbow 120 RGB renders up to 256 shades to produce dynamic effects or covers up to seven colours in the static mode. Moreover, the setup chosen by the user is supported after the PC switching off. The backlighting is adjusted just by pushing a little button.



The special blade configuration directs air flow to the outer side, thus increasing the static pressure level and enhancing the process of flows distribution inside the system unit. Fluid bearings extend the service life, and fan rubber pads at the places of mounting holes lower the vibration and noise level.


The top rotational speed of Rainbow 120 RGB is 1,200 rpm, and the air flow capacity equals to 1.2 m3/min. This device possesses a three-pin power supply connector and features the 12 V nominal voltage. The noise factor is not higher than 24.8 dBA.

AUTOMATIC SEARCH & INSTALL
device drivers
Freeware
Download (9MB)
DevID agent v4.38
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 21 April 2012, 14:33
Last visit: 21 April 2012, 14:33