QNAP to Come up with TS-x51 NAS Series

QNAP, a well-known designer of network and CCTV monitoring solutions, is glad to come up with a new series of NAS devices – the TS-x51. The series is currently introduced by two models with two and four drive sections. They are intended to operate under the base of Microsoft Hyper-V, Windows Server 2012, VMware VSphere, Citrix XENServer platforms. Both new-comers are housed in stylish white enclosures that match either home or corporate environment.



The TS-x51 storages are based on Intel processor with 2.4GHz clock frequency. It is accompanied by 1 GB RAM (DDR3L), 7.1-channel audio controller, and Wi-Fi 802.11ac adapter via an independent USB key. These NAS support the installation of SSD/HDD/SSHD drives of 3.5-inch form-factor with SATA III 6 Gb/sec interface. The frontal panel accommodates activity indicators, Power and Reset buttons, as well as a single USB 3.0 port.


To continue, both versions of storages offer imagery-data recording options and support virtual …

Overview of the Aerocool P7-C1 Midi Tower Case (Part II)

Main Features

According to the manufacturer’s specifications, the case may accommodate very large components: a video card up to 375 mm (or 400 mm in the absence of the front fans) and a power supply of up to 200 mm in length. CPU cooler may be up to 165 mm high.


Despite the construction of Aerocool P7-C1, the power supply is placed in the most common way, and the board is set to the standard six-millimetre racks. The thumbscrews for fixing it are not supplied.


Let’s have a closer look onto the drive installation. The carriers for 3.5" storage devices are simply stretched on hard drives. They are to be straightened a little to be installed. The 2.5" storage devices are attached to the carriers’ by cogs, and it is possible to mount them not only to the ends, but to the ground as well.


The carriers with the mounted hard drive are simply retracted and sit in place securely enough. And the solid-state drives are fixed to the carriers by thumbscrews.

The GeForce GTX 1080 Ti Graphics Card Has Much In Common With Titan X, but Holds More Elements

Several days ago Nvidia has introduced its most effective consumer graphics card, namely GeForce GTX 1080 Ti. It is GP102 GPU based and holds 3,584 CUDAs. This device resembles the Titan X sample. Its graphics engine is the same, however, the number of ROP units (96) is higher, the memory bus (384 bits) is wider, the memory volume (12 GB) is bigger, frequencies are higher, and the price is much lower!



As it turned out, GeForce GTX 1080 Ti is produced with a PC-board of its high-end counterpart, but there are differences in electronic components. Thus, the power subsystem has been refined due to the duplicated quantity of MOSFET transistors. Now it is possible to overclock the adapter to higher frequencies. GTX 1080 Ti has got nine extra solid capacitors. The absence of a DVI port provides more vents on the back panel.


In general, for public users this product almost copies the more expensive Titan X model and at the same time can be more productive in games.
AUTOMATIC SEARCH & INSTALL
device drivers
Freeware
Download (9MB)
DevID agent v4.41
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 05 April 2012, 17:44
Last visit: 05 April 2012, 17:56