Palit Intros GeForce GTX 750 KalmX Graphics Card

Palit, one of the world largest manufacturers of graphics cards, came up to the market with one more edition to the GeForce GTX 750 series – the GeForce GTX 750 KalmX. The model employs etalon PCB with PCIe 3.0 x16 interface and a two-slot passive cooling system. The latter accommodates a massive nickel-plated heatsink, consisting of 43 thin fins, and two heatpipes that connect the heatsink with a copper base. The unique model is already available in German online-stores for 114.9 EUR.



Plait GeForce GTX 750 KalmX is geared up by GM107-300 GPU (28 nm, Maxwell architecture) with 512 CUDA cores. Its base/efficient clock frequency makes up 1020 MHz/1185 MHz. The chip is accompanied by 2 GB of GDDR5 memory with 128-bit interface; its operational clock frequency approximates 5010 MHz.


The list of external interfaces, which are located on the rear panel, includes a couple of DVI ports and a single mini-HDMI port. One should take into consideration that the card is void of an …

EKWB Launches a New Water Block for GV-N680SO-2GD

Early August of 2012 was marked for Gigabyte by the release of its one more graphics card, codenamed GeForce GTX 680 SOC (GV-N680SO-2GD). This card can boast the availability of high factory frequencies and quite mighty cooling system. The nominal frequencies have been heightened to 1137MHz, 1202MHz, and 6200MHz for memory. Such outstanding characteristics required the integration of a high-quality and high-performance cooling system which consisted of five(!) fans. This made the card rather voluminous, cumbersome and noisy. That was when EKWB decided to design a dedicated water block to be employed with this remarkable graphics adapter.



Water block EK-FC 680 GTX SOC is housed on a copper base, good-quality acetal cover, and rubber shims as a compressor. The model is delivered with pre-installed fixing stands to facilitate the installation. It should be noted that this water block entirely covers the frontal part of the graphics card, along with the adjacent RAM modules and …

Asus to Start Shipping Radeon R9 290 DirectCU II OC Graphics Card

Next week Asus is going to start shipping its newest graphics card from Radeon R9 series. Codenamed Radeon R9 290 DirectCU II OC, it is based on an original PCB with black-and-red design and the incorporation of an exclusive DirectCU II cooling system. Plus, the availability of ‘OC’ in the codename implies the availability of factory overclocking.



Asus Radeon R9 290 DirectCU II OC takes GCN Hawaii core with 2816 stream processors as the basis. It operates at an overclocked 1000 MHz frequency. The model is equipped with 4 GB of GDDR5 memory (512-bit bus) that runs at an effective 5400 MHz frequency. Just for a comparison, etalon adapter from AMD runs at 947 MHz/ 5000 MHz for GPU/memory correspondingly.


DirectCU II cooler consists of a heatsink, four copper nickel-plated heatpipes (two of them feature 10 mm dimensions), and two high-performance fans: one ordinary and one CoolTech. The card receives power via 6+8-pin connectors and might require not less than 600 W PSU.
AUTOMATIC SEARCH & INSTALL
device drivers
Freeware
Download (9MB)
DevID agent v4.37
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 03 January 2012, 15:08
Last visit: 03 January 2012, 15:08