Crucial Showcases Voluminous MX300 Solid-State Drives

Crucial is about to launch a new series of voluminous SSDs, entitled MX300. The lineup consists of 2.5-inch models with thin cases (7 mm only), targeting as desktop so mobile platforms. Additionally, the delivery set offers a dedicated 2.5-inch frame for the installation into a 9.5-inch bay. The capacity of drives makes up 275 GB, 525 GB, 750 GB, 1 TB, and 2 TB.



SSDs Crucial MX300 is developed on 32-layer Micron 3D NAND TLC chips (48 GB) as well as Marvell 88SS1074 controller. Data transfer process is realized via SATA III (6 Gb/sec) interface. The maximal sequential Read/Write speed equals to 530 MB/sec/510 MB/sec. In its turn, the maximal random data transfer index approximates 83.000/92.000 IOPS (Read/Write).


The greenhorns are thought to support the following technologies: AES, ECC, T.R.I.M., Data Path Protection, S.M.A.R.T., Active Garbage Collection, Power Loss Prevention, and Extreme Energy Efficiency. Besides, Dynamic Write Acceleration identifies and writes the …

The Introduction of Transparent Chassis from Scythe

Scythe has recently amazed the community by the introduction of absolutely transparent chassis. ACB-Type3 model preserves the cutout of the standard Mid-Tower chassis solutions, but is made of transparent acrylic plates. One more peculiarity of this model is the parallel to the base localization of motherboard. Besides, ACB-Type3 is compatible with motherboards of various form-factor, including mini-ITX, micro-ATX, and ATX.



The motherboard is accommodated on a special tray. Right under this tray the customers are able to find a set of bays designated for the installation of PSU, three 3.5-inch drives, a couple of 2.5-inch drives, and three 5.25-inch drives. The chassis is compatible with CPU coolers of up to 190 mm in height.


At the same time, this model goes without any fans or side panels; this attributes the model to Open-Air segment. The product can content itself with practically noiseless passive system.


Scythe ACB-Type3 is equipped with sufficient number of …

New characteristics of co-processors Xeon Phi

For several years, developed Intel Larrabee graphics cards have changed its destiny, and now proudly referred to coprocessors Xeon Phi. The June announcement gave a very rough idea of ​​their characteristics and applications (highly specialized servers and workstations). Now some details will be revealed.



Bboosters Xeon Phi will be available in versions with 57, 60 and 61 core. There are in general 64 computational units, but some of them will be disabled. Depending on the number of cores the cache size varies from 1.8-1.9 MB first level and 28-30,5 MB second. The volume of onboard GDDR5 memory is 3, 6, and 8 GB.


Intel Xeon Phi device will operate on a low clock rate from 600-1100 MHz for the lower 57-core models with 3 and 6 GB of GDDR5, to the 630-1050 MHz or more for the older 60 — and 61-core board with 8 GB of RAM. Effective memory frequency will be in the range of 5-5.5 GHz. Support for dynamic overclocking Turbo Boost will be provided by reasonable balance of …
AUTOMATIC SEARCH & INSTALL
device drivers
Freeware
Download (9MB)
DevID agent v4.37
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 20 March 2011, 07:43
Last visit: 20 March 2011, 07:43