Meet Small-Sized QC5000M Mainboard from ASRock

ASRock enters the mainboard market with a new micro-ATX solution, entitled QC5000M. The greenhorn takes Kabini platform as the basis, featuring AMD A4-5000 hybrid processor (28 nm) with 4 Jaguar cores and 1.5 GHz clock frequency. The APU is accompanied by two slots for one-channel DDR3-1600 MHz RAM (up to 32 GB) and an integrated AMD Radeon HD 8330 graphics (500 MHz clock frequency, compatibility with DirectX 11.1 standard).

The implemented APU boasts 15 W TDP only, requiring a small-sized heatsink for efficient cooling. The model takes power via 24-pin ATX connector and is based on AMD A68 chipset. It is equipped with a single PCI Express 2.0 x16 slot, a pair of PCI Express 2.0 x1 slots, and the same amount of SATA III 6 Gb/sec ports.

Network and audio facilities are represented by Realtek RTL8111GR Gigabit Ethernet controller and 7.1-channel Realtek ALC887 codec respectively. Additionally, the PCB is furnished with ELNA sound capacitors. The rear side of the motherboard …

PowerColor Intros New Graphics Card with Fling Force Cooler

TUL Corporation, in the framework of its PowerColor brand, introduces a new graphics card with quite an original way of air cooling organization. The new-coming adapter, codenamed PowerColor Radeon HD 7850 Fling Force, employs 'two-storied' cooler of an unusual structure. Along with an aluminum heatsink, copper heat pipes, and a voluminous fan, the manufacturer implemented non-monolithic fan ribs. Their tips are fixed to the main part in a way to change their location relative to the plain of rotation.

On conditions of low rotational speed, tips of the ribs are located at approximately 80 degrees angle relative to the graphics card. On conditions of heightened speed, the ribs become more linear; this way, the impeller diameter enlarges from 92 mm to 95 mm. Such structural approach to the fan framework develops into an improved performance and air cooling effect.

The model is based on Pitcairn chip, developed on Graphics Core Next architecture under 28 nm technological …

3D-Media Player 3Q F370HW Review

The launch of 3D media players with two operational systems triggered a real sensation among all potential customer groups. Those media players offered high-performance and cost-effective solutions for home use which could not but rejoice enthusiasts and gamers. Developers from 3Q company introduce their new media player F370HW called to satisfy the needs of the most fastidious users. The player took some characteristics integrated in other products, although it’s able to offer a dozen of fresh solutions.

Design and Framework

Media player F370HW casing is made of aluminum, except of the clipboard which is made of opaque plastic. LED-display, localized under the board glass, maps the current operational mode and the icons of all connected devices. The lower part of the clipboard is equipped with a single power button with blue highlight. The rear board is the place for multiple slots and sockets: one can find SD/SDHC memory card slot, four USB 2.0 sockets for the …
Get computer-assisted driver search with our brand utility *
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 10 December 2011, 04:51
Last visit: 10 January 2012, 11:19