Company XFX is preparing Radeon HD 7970 GE with Double Dissipation cooler

American vendor XFX is about two weeks to release a Radeon 7970 Edition Double Dissipation (model code — FX-797G-TDF). It combines the capabilities of GPU Tahiti XT2 with a higher overclocking potential and the TDP, rather than at Tahiti XT, PCB reference design, but without a single phase power supply (6 +1), and the cooling system in the vaporizing chamber, an array of aluminum fins, PA plate (the same heatsink for the VRM and memory), as well as the two fans standard size 90 mm.



New model will get the recommended for the Radeon HD 7970 GE frequency ratio 1000/6000 MHz for core and chips GDDR5. The graphics chip will operate at 1050 MHz in the load. Recall that the “usual” HD 7970 was limited to regular frequencies 925/5500 MHz and did not support dynamic overclocking.


The configuration of video outputs is almost standard: from the five of DVI-I, DVI-D, HDMI and 2x Mini DisplayPort for some reason excluded DVI-D. The additional power is supplied by one 8-pin and one …

An elegant white CORSAIR RM1000i Special Edition Power Unit

The CORSAIR Company celebrates its 10th anniversary since the first release of power units. This manufacturer has already passed out 10 mln of power supply devices. To mark this great event out the company presented a snow-white CORSAIR RM1000i Special Edition model with white fan LED-lighting.



There will be only 100 samples available on sale, each having its own serial number. The overall CORSAIR RM1000i Special Edition power equals to 1,000 W, and the efficiency factor is 90% (the 80 PLUS Gold certification is received). By default it uses eight +12V virtual circuits with 40 А load capacity, though if necessary, one can put them into one powerful +12V channel with the max output capability of 1,000 W.


Needless to say, that the up-to-date circuit technology and top-grade element base are inside. A 135 mm fan, based on FDB bearings, is installed to provide active cooling. Also the CORSAIR RM1000i Special Edition cable system is entirely module and possesses handy line …

Enermax Starts Selling Chassis Hoplite ST

Enermax Technology Corp. has voiced good news about the appearance of its new chassis Hoplite ST in the European market. The basic destination of Hoplite ST model is the creation of gaming PCs of the entry and middle level. The chassis is developed in midi-tower form factor and is compatible with motherboards of micro-ATX and ATX standards. Hoplite ST is delivered in two colors: models with black casings were codenamed ECA3261-B, while models with white casings – ECA3261-W.



The casing is made of SECC steel and has got rather convenient framework. The chassis contains four external 5.25 inch bays and six internal ones destined as for 3.5 inch drives, so for 2.5 inch drives. It is also equipped with seven expansion slots, and ready to accommodate graphics cards of up to 403 mm in length, as well as, CPU coolers of 167 mm in height.


The nominal delivery kit of Hoplite ST chassis involves two 120 mm fans. The frontal fan goes with LED lighting; the other fan is located at …
AUTOMATIC SEARCH & INSTALL
device drivers
Freeware
Download (9MB)
DevID agent v4.41
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 12 February 2012, 16:47
Last visit: 12 February 2012, 17:37