Meet Small-Sized QC5000M Mainboard from ASRock

ASRock enters the mainboard market with a new micro-ATX solution, entitled QC5000M. The greenhorn takes Kabini platform as the basis, featuring AMD A4-5000 hybrid processor (28 nm) with 4 Jaguar cores and 1.5 GHz clock frequency. The APU is accompanied by two slots for one-channel DDR3-1600 MHz RAM (up to 32 GB) and an integrated AMD Radeon HD 8330 graphics (500 MHz clock frequency, compatibility with DirectX 11.1 standard).

The implemented APU boasts 15 W TDP only, requiring a small-sized heatsink for efficient cooling. The model takes power via 24-pin ATX connector and is based on AMD A68 chipset. It is equipped with a single PCI Express 2.0 x16 slot, a pair of PCI Express 2.0 x1 slots, and the same amount of SATA III 6 Gb/sec ports.

Network and audio facilities are represented by Realtek RTL8111GR Gigabit Ethernet controller and 7.1-channel Realtek ALC887 codec respectively. Additionally, the PCB is furnished with ELNA sound capacitors. The rear side of the motherboard …

A Triplet of Waterblocks for Titan Z Graphics Solutions from EK Water Blocks

EK Water Blocks, a well-known Slovenian manufacturer of enthusiast-level liquid coolers for GPUs, has just introduced a triplet of waterblocks for the newly arrived Nvidia GeForce GTX Titan Z adapters. The EK-FC Titan Z – Nickel, EK-FC Titan Z – Nickel (Original CSQ) and EK-FC Titan Z – Acetal + Nickel models are sure to provide the maximal cooling at the highest frequencies both for dual- GPUs and memory chips. All the blocks come with a transparent acrylic cover and a lid from POM ACETAL plastic.

EK-FC Titan Z waterblocks are attributed to full-cover solutions. This implies that they efficiently remove heat not only from graphics cores, but also from GDDR5 memory chips, as well as from voltage regulators of VRM subsystem. Areas in direct contact with the GPUs are equipped with micro-channels of 0.7 mm width. The blocks maintain resistance to the coolant stream; hence, they might be employed along with low-power pumps.

The waterblocks features copper nickel-plated …

External HDD Adata DashDrive Durable HD710 Review

The situation in the segment of external hard drives can nowadays be viewed twofold. On the one hand, the customers are able to choose the device according to all their requirements, as the range of HDD counts up hundreds of high-end and budgetary models. On the other hand, such wide spectrum of devices triggers violent competition among manufacturers which would like to win their customers by unique design or new developments in framework. Adata decided to win its customers by the unusual design, as well as unmatched durability and reliability. Thus, Adata DashDrive Durable HD710 series is distinguished by both, design and performance.

General Peculiarities and Layout

Adata HD710 is attributed to the protected external HDs which comply with the dust-, water-, and moisture protectability international standards. Those standards usually include a few dozens of sub-standards and research methods which allow the manufacturer to test their products in different conditions. …
Get computer-assisted driver search with our brand utility *
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 02 May 2012, 20:34
Last visit: 02 May 2012, 20:34