Company XFX is preparing Radeon HD 7970 GE with Double Dissipation cooler

American vendor XFX is about two weeks to release a Radeon 7970 Edition Double Dissipation (model code — FX-797G-TDF). It combines the capabilities of GPU Tahiti XT2 with a higher overclocking potential and the TDP, rather than at Tahiti XT, PCB reference design, but without a single phase power supply (6 +1), and the cooling system in the vaporizing chamber, an array of aluminum fins, PA plate (the same heatsink for the VRM and memory), as well as the two fans standard size 90 mm.



New model will get the recommended for the Radeon HD 7970 GE frequency ratio 1000/6000 MHz for core and chips GDDR5. The graphics chip will operate at 1050 MHz in the load. Recall that the “usual” HD 7970 was limited to regular frequencies 925/5500 MHz and did not support dynamic overclocking.


The configuration of video outputs is almost standard: from the five of DVI-I, DVI-D, HDMI and 2x Mini DisplayPort for some reason excluded DVI-D. The additional power is supplied by one 8-pin and one …

Noctua NH-D9L Review

So let’s review an alternative cooling system Noctua NH-D9L which is in many ways similar to the previously released Noctua NH-U9S. It is at least attractive because it is a miniature copy of Noctua NH-D15. But the question is: why was it needed to release two models with similar parameters and effectiveness in the 92mm fan cooler segment, which is not the most popular one.


Equipment

Packaging is on the highest level traditional for Noctua. All the necessary information is presented on the box sides. The following components are included in addition to a radiator and a fan:

• reinforcement plate for Intel LGA115h sockets; • mounting studs for Intel LGA2011 and LGA 2011-3 sockets; • mounting feet and plastic stands for the Intel sockets; • mounting feet, plastic stands and screws for the AMD sockets; • knurled nuts to secure the feet on the Intel sockets; • additional brackets for mounting the second fan; • silicone gaskets for fans; • crosshead …

Seagate Announces a Bunch of New SSDs Targeting Various Segments

Seagate Technology, one of the leading players in HDD/SSD industry, announces the release of its first solid-state drive targeting consumer segment and next-generation drives targeting corporate field. Therefore, corporate clients will be able to enjoy the privileges of Seagate 1200 SSD that is primarily predestined for the implementation into high-end server systems. These drives will be released in three capacity versions (200 GB, 400 GB and 800 GB) and will employ SAS interface with 12 Gb/sec bandwidth.



Seagate 600 SSD is developed in 2.5-inch form-factor with two case depth modifications: 5 mm and 7 mm. The new-comers are supposed to be the most optimal solution for laptops and other small-sized devices. These drives employ SATA III interface and demonstrate quite striking speed characteristics: the maximal sequential Read speed achieves 550 Mb/sec, while the maximal sequential Write speed equals to 450 Mb/sec. Seagate 600 will be available in three volume capacities (120 …
AUTOMATIC SEARCH & INSTALL
device drivers
Freeware
Download (9MB)
DevID agent v4.36
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 14 July 2012, 20:40
Last visit: 14 July 2012, 21:00