Three-Dimensional Monitor HP 2311 GT Review

Three-dimensional technology applied in PC monitors enjoys popularity primarily with more well-to-do people rather than general public. This can be simply explained by the price aspect attached to the issue: 3D monitors with all accompanying equipment are a costly acquirement, and not every customer is ready or can afford buying them for home use. Hewlett-Packard company always tries to comply with the demands and possibilities of their consumers; however, the company does not forget about the development and innovations. Thus, HP delivered three-dimensional monitor with passive polarized 3D technology, codenamed HP 2311 GT.



Design and Specifications


First of all, it should be mentioned that HP 2311 GT is basically oriented on the entry level customers, and this is vindicated by the moderate price policy ascribed to the series. The casing is made of plastic with mould base; this base does not allow any alterations in monitor's height or rotation. The tilt can be adjusted …

MSI B75IA-E33 - cost-effective Mini-ITX board for processors Ivy Bridge

In early August, it was mentioned about the fact that MSI developer of motherboards is preparing to release three new products in the form factor Mini-ITX on chipsets A85, B75, and Z77. As it turned out, the first low-cost board will be MSI B75IA-E33 — it will start selling in Europe at the end of this week at prices ranging from € 95.



The functionality of this product is limited with respect to the other two models; however, a set of components in B75IA-E33 is very decent. LGA1155 processor socket is energized by three phases (provides additional power to the ATX12V 4-pin), hidden under a small cooler chipset Intel B75. Available one connector PCI Express 3.0 x16, two slots for memory modules DDR3-1066/1333/1600 total up to 16 GB, SATA port 6Gb / s and SATA 3 Gbit / s (3 units) to connect storage devices.


A pair of USB 3.0 on the rear panel are completed with a 19-pin connector on the PCB, through which on the front panel I / O can be taken two SuperSpeed USB. The …

Cooler Master to Release a New Budgetary Midi-Tower Chassis

New PC chassis from Cooler Master appear in the market with an enviable regularity. Each customer group, starting from entry-level customers and finishing with overclockers, can totally avail themselves with the up-dated facilities provided by the developer. This time, individuals with a quite modest budget will have an opportunity to enjoy all the privileges of contemporary technologies, since Cooler Master is going to release next month a new budgetary PC case of midi-tower form-factor. Codenamed CM Force 500, the case features 491.5x190.426 mm dimensions and is entirely painted black.



Chassis CM Force 500 supports motherboards of ATX and micro-ATX standard, and is ready to welcome all graphics adapters of up to 320 mm in length. Internal framework is estimated for the installation as of air cooling system, so of liquid coolers; hence, the maximal admissible height of the CPU air cooler approximates 164 mm, while dimensions of the heatsink attached to the liquid cooler should …
AUTOMATIC SEARCH & INSTALL
device drivers
Freeware
Download (9MB)
DevID agent v4.36
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 06 February 2012, 10:51
Last visit: 06 February 2012, 10:51