Kingmax to Amaze the Customers with mSATA MMP20 SSD

Solid-state drives with mSATA interface have become an efficient tool for the improvement of laptops and nettops performance. Kingmax has joined the ranges of companies that develop SSD technologies in mSATA form-factor. Its fresh model line, MMP20, is primarily targeted at the small form-factor systems and hybrid solutions like HDD+SSD. The SSD model line features ‘Premium Selected’ certificate and has undergone thorough testing challenges.

Kingmax mSATA MMP20 is a compact and effective solution not only for laptops and desktop systems, but also for embedded systems like tablets. Kingmax SSDs comply with JEDEC MO-300B requirements and have SATAII 3 Gb/sec interface. They are furnished with a controller which optimizes the memory monitoring to ensure the most appropriate performance and reliability. SATA interface is called to align the connection between the flash-memory and host-system; this is supposed to improve data reading and writing speed, OS and applications …

Aerocool Intros Dead Silence System Fans

Aerocool Advanced Technologies is going to launch a new lineup of 140/120 mm system fans, entitled Dead Silence. As seen from the title, the products are distinguished by absolutely noiseless operation. However, this is not the only attraction. The lineup is introduced by bicolor models with black frames and white/blue/red/black mounting components. Four onboard LED backlight add to the fans’ aesthetic effect.

All the fans are designed on a hydrodynamic bearing that is able to run approximately 100.000 hours on end. All of them are connected to the motherboard by means of a 3-pin connector. The blades are made of two different materials (rubber and plastic), whereas their reverse side features a dedicated Fish-eye design. It provides for the minimization of turbulence. Moreover, four rubber clamps on the frame’s edges terminate the vibration and noise.

To proceed with the peculiarities, Aerocool Dead Silence fans of 120 mm dimensional type rotate at the maximal 1200 …

MSI is preparing new model - Radeon HD 7970 with a water-block

The well-known in IT-maker Company MSI announced about appearance of new videoadapter based on GPU Tahiti XT chipset. Its diversity from the other Radeon HD 7970 can be seen with the naked eye, instead of an air cooler practically the entire surface of the PCB is covered with waterblock brand EK. It differs markedly from the original version, since it is designed specifically for the MSI R7970 Lightning model. Relation of adapter to the Lightning series is easily determined by the inscription at the interface connector PCI-E 3.0 x16, as well as non-standard set of video outputs (2x DVI, 4x Mini DisplayPort) and configuration of additional power connectors (2x PCI-E Power 8-pin).

Obviously, the accelerator is positioned as the Radeon HD 7970 GHz Edition and has a nominal frequency of at least 1050 MHz. Will MSI risk, like Sapphire did, and provide the card with 6 GB of memory? Probably not. The «advanced» composition of the printed circuit board and water block of full coverage …
Get computer-assisted driver search with our brand utility *
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 22 January 2012, 14:32
Last visit: 19 March 2012, 13:31