HIS Radeon R9 290 IceQ X2: Graphics Card with an Offbeat Cooler

HIS has recently replenished its Radeon R9 series of graphics cards with a new model – the Radeon R9 290 IceQ X2. Based on AMD Hawaii Pro chip, this card is a combination of an ultimate efficiency and an offbeat design. The integrated GPU runs at an etalon frequency — 947 MHz. No changes have been incorporated into the frequency mode of GDDR5 memory: the 4 GB memory with 512-bus interface runs at nominal/effective 1250/5000 MHz frequency.

The major peculiarity pertained to the model is the employment of a proprietary two-slot cooler, codenamed IceQ X2. It consists of a spacious copper base (40x47.5 mm), a large aluminum heatsink, a pair of 89 mm fans, and five nickel-plated heatpipes: 2x 8 mm and 3x 6 mm. The cooler also accommodates additional heatspreaders, which dissipate heat in memory and VRM sections. Moreover, the framework boasts a dedicated stiffening plate that reduces loading on the printed circuit board.

To continue, HIS Radeon R9 290 IceQ X2 comes with two …

Company XFX is preparing Radeon HD 7970 GE with Double Dissipation cooler

American vendor XFX is about two weeks to release a Radeon 7970 Edition Double Dissipation (model code — FX-797G-TDF). It combines the capabilities of GPU Tahiti XT2 with a higher overclocking potential and the TDP, rather than at Tahiti XT, PCB reference design, but without a single phase power supply (6 +1), and the cooling system in the vaporizing chamber, an array of aluminum fins, PA plate (the same heatsink for the VRM and memory), as well as the two fans standard size 90 mm.

New model will get the recommended for the Radeon HD 7970 GE frequency ratio 1000/6000 MHz for core and chips GDDR5. The graphics chip will operate at 1050 MHz in the load. Recall that the “usual” HD 7970 was limited to regular frequencies 925/5500 MHz and did not support dynamic overclocking.

The configuration of video outputs is almost standard: from the five of DVI-I, DVI-D, HDMI and 2x Mini DisplayPort for some reason excluded DVI-D. The additional power is supplied by one 8-pin and one …

Deepcool to Release an Updated Lucifer K2 Efficient CPU Cooler

Deepcool has introduced a ‘companion’ to its well-known cooler entitled Lucifer V2. The all-new Lucifer K2 features 163x146.5x131 mm dimensions and weighs 1047 g. The new-comer supports AMD and Intel platforms, including LGA2011-v3, LGA2011, LGA1366, LGA115x, LGA775 (Intel) & Socket FM2, FM2+, FM1, AM2, AM2+, AM3, AM3+ (AMD) as well as various CPUs with TDP level of not more than 130 W.

Deepcool Lucifer K2 boasts a purely-polished copper base, six copper heatpipes and an aluminum heatsink (140x110x163 mm). The latter ensures a large heat dissipation area. Despite having stately proportions, the cooler does not block off the access towards DIMM slots.

The key differentiation between V2 and K2 models lies in the choice of a fan. The previous solution featured a 140-mm item, while the newer one – a 120-mm fan, based on a fluid-dynamic bearing. The fan supports PWM technology that provides for a wide rotational range — from 600 RPM to 1800 RPM, — generating up to …
Get computer-assisted driver search with our brand utility *
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 02 June 2011, 00:54
Last visit: 02 June 2011, 00:54