Computer Case be quiet! Silent Base 600 Overview (Part II)

Internal structure

The motherboard compartment is located above the power supply unit. In this regard, everything is quite standard for a Mid Tower class. A large cutout is made in a tray behind a CPU socket, to allow installation of a CPU cooling system directly into the case; a backplate mount (thrust-pad located on the back side of the motherboard) is used for this purpose.


The four large slots in a tray, equipped with the silicone membrane, are designed for proper cable management which looks very promising here. Plugs of expansion slots are attached by thumbscrews. The front part holds a hard disks’ basket for three drives.


At the back side a slot in a tray can be clearly seen to access cable management system slot. Also, the rear side contains two tool kits for installation of solid-state drives and size 2.5" hard disks.


The side cover is made of 0.7 mm steel, and from the inside has a thick vibration and noise absorbing coating. The recess in the …

MSI Introduces Newest Z77A-GD65 Gaming Motherboard

First displayed at CeBIT 2013, MSI Z77A-GD65 Gaming motherboard is now showing out in the company’s product line. As suggested by the name and attention-getting design, the board has been elaborated specifically for gaming needs. The new-comer is based on Z77 chipset, features ATX form-factor, and supports Intel LGA1155-compatible processors of the second and third generation (Sandy Bridge/Ivy Bridge).



Among the most attractive facilities ascribed to the model, it’s possible to distinguish the incorporation of Qualcomm Atheros Killer E2200 network platform. This platform provides for a substantial improvement of network connection quality, by means of defining all gaming traffic and assigning it a major priority.


The motherboard is known to employ high-quality Military Class III components, including CopperMOS elements in copper cases, gold-plate throttles with Golden SSC ferrite mandrel, tantalum Hi-c CAP capacitors, as well as solid-state capacitors with …

MSI B75IA-E33 - cost-effective Mini-ITX board for processors Ivy Bridge

In early August, it was mentioned about the fact that MSI developer of motherboards is preparing to release three new products in the form factor Mini-ITX on chipsets A85, B75, and Z77. As it turned out, the first low-cost board will be MSI B75IA-E33 — it will start selling in Europe at the end of this week at prices ranging from € 95.



The functionality of this product is limited with respect to the other two models; however, a set of components in B75IA-E33 is very decent. LGA1155 processor socket is energized by three phases (provides additional power to the ATX12V 4-pin), hidden under a small cooler chipset Intel B75. Available one connector PCI Express 3.0 x16, two slots for memory modules DDR3-1066/1333/1600 total up to 16 GB, SATA port 6Gb / s and SATA 3 Gbit / s (3 units) to connect storage devices.


A pair of USB 3.0 on the rear panel are completed with a 19-pin connector on the PCB, through which on the front panel I / O can be taken two SuperSpeed USB. The …
AUTOMATIC SEARCH & INSTALL
device drivers
Freeware
Download (9MB)
DevID agent v4.37
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 09 July 2012, 21:00
Last visit: 11 July 2012, 12:56