ECS to Release a Small-Sized H110S-2P Motherboard

ECS has officially introduced a new mini-STX motherboard, entitled H110S-2P. Featuring 147x140 mm dimensions, the greenhorn is based on Intel H110 chipset for Socket LGA1151 platform. The most peculiar thing about the mainboard is the availability of a full-sized LGA socket which allows for the installation of desktop CPUs (Intel Pentium/Celeron/Core i3/Core i5/Core i7) with the maximal TDP of 65 W.

Upon the whole, the model is targeting small-sized PCs. ECS H110S-2P accommodates a pair of SO-DIMM slots with support for 32 GB of DDR4-2133 MHz memory modules. Storage subsystem is backed by a single SATA 6 Gb/sec port & a single M.2 slot for SSD. There is also another M.2 slot but it is intended for the integration of wireless Wi-Fi/Bluetooth modules.

Audio subsystem is developed on the basis of Realtek ALC662 controller, whereas network facilities – on the basis of Realtek 8111H controller. The motherboard comes equipped with a couple of 3.5-mm audio ports, one RJ-45 …

Aerocool Intros Dead Silence System Fans

Aerocool Advanced Technologies is going to launch a new lineup of 140/120 mm system fans, entitled Dead Silence. As seen from the title, the products are distinguished by absolutely noiseless operation. However, this is not the only attraction. The lineup is introduced by bicolor models with black frames and white/blue/red/black mounting components. Four onboard LED backlight add to the fans’ aesthetic effect.

All the fans are designed on a hydrodynamic bearing that is able to run approximately 100.000 hours on end. All of them are connected to the motherboard by means of a 3-pin connector. The blades are made of two different materials (rubber and plastic), whereas their reverse side features a dedicated Fish-eye design. It provides for the minimization of turbulence. Moreover, four rubber clamps on the frame’s edges terminate the vibration and noise.

To proceed with the peculiarities, Aerocool Dead Silence fans of 120 mm dimensional type rotate at the maximal 1200 …

Palit to Release a Pair of GTX 1060 Video Cards

Palit is enlarging its lineup of GeForce GTX 1060 adapters with a pair of new models. The GTX 1060 Dual 3GB and the GTX 1060 StormX 3G are developed on Nvidia GP106-300 GPUs (16 FinFet), featuring 1152 CUDA cores, 72 TMUs & 48 ROPs. It runs at 1506/1708 MHz frequency (standard/dynamic). Both models are accompanied by 3 GB of GDDR5 memory (192-bit bus) that operates at 2000/8000 MHz frequency (standard/efficient).

The key differentiation between the models lies in the cooling system. Palit GeForce GTX 1060 StormX 3G is equipped with a single fan, replenished with a main heatsink and an additional one, housed on the power circuit. In its turn, Palit Geforce GTX 1060 Dual 3GB is fitted with a voluminous rectangular heat spreader, three copper heat pipes as well as two fans. Thus, it’s an ideal choice for overclockers.

Both video cards employ a single 6-pin connector to draw power. They feature a high-quality hardware base which counts solid-state capacitors, DrMOS chips, …
Get computer-assisted driver search with our brand utility *
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 03 December 2011, 12:36
Last visit: 05 December 2011, 17:27