Evga Launches One More Overclocked Graphics Card

Evga, a leading American supplier of 3D cards, is going to launch one more graphics card with factory overclocked speeds. A new model is based on Nvidia FeForce GTX 670 adapter and codenamed as Evga GeForce GTX 670 FTW LE. Its design resembles the one implemented in GeForce GTX 670 FTW card, but the main distinction between them is seen in frequency showings. The newbie demonstrates a bit lower frequency index than its predecessor.

Evga GeForce GTX 670 FTW LE is housed on a PCB designed for PCI-e 3.0 x16 bus. This card takes GK104 graphics core with 1344 CUDA cores as the basis; it is developed on Kepler architecture under 28 nm standards. Its inventory also embraces 2GB of GDDR5 memory (256-bit interface). Cooling system is introduced by a 2-slot cooler of active type with a single turbine-like fan. Power subsystem consists of two connection 6-pin sockets and requires a quite efficient PSU (not less than 500W power).

Frequency template looks the following way: GPU runs at …

Announcement of video card Gigabyte Radeon HD 7970 Super Overclock

The efforts of Gigabyte engineers culminated in the release of the Radeon HD 7970 Super Overclock, also known as GV-R797SO-3GD. This is a monstrous construction with height of 64 mm (3.5 expansion slots) and a cooling system WindForce 5X. As well as preparing to be released GeForce GTX 680 SOC, the new adapter uses a five high-speed (> 4000 rev / min) fan size of 40 mm, copper evaporation chamber, and five copper heat pipes.

WindForce 5X – is one of the most expensive VGA-coolers, except for models with water blocks and liquid cooling system. It will allow to overclock Gigabyte GV-R797SO-3GD up to frequencies of 1155/7620 MHz. However, neither the temperature nor the noise performance of video card can be considered satisfactory: 85 degrees under load and 91 ° C for overclocking with increased voltage, and 8000 rpm in a heavy-duty (1185 MHz, 1.375 V) explains the situation.

Printed circuit board Radeon HD 7970 SOC is reinforced with five polymer capacitors NEC / …

IEI Releases Small-Type Motherboards Kino-CVR-D25502/N26002

IEI has replenished its line of products with a motherboard series intended for application in small-type home PCs due to the implemented mini-ITX form-factor. All previous products of this manufacturer were basically oriented on the enterprise sector, however IEI decided to widen its facilities by developing quite new motherboards for home use. The series is represented by two models: Kino-CVR-D25502 and N26002 which have got a lot of common, as well as, different parameters.

In fact, the major distinctions between the two models can be dwindled down to the implemented processors. Kino-CVR—D2550 employs two-core Intel Atom processor D2550, while N26002 model is equipped with Intel Atom 2600. The difference is seen also in clock frequencies and RAM volume capacities. D2550 is able to achieve 1.86 GHz and is notable for 4 GB RAM capacity; N2600 achieves 1.6 GHz and characterizes by only 2 GB RAM capacity.

IEI Kino-CVR motherboards employ Intel ICH10R southern bridge. RAM …
Get computer-assisted driver search with our brand utility *
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 08 October 2012, 12:54
Last visit: 08 September 2013, 20:58