Gigabyte Intros Micro-ATX Motherboards on Intel H81 Express Chipset

Gigabyte Technology introduces three new motherboards of micro-ATX form-factor, based on Intel H81 Express chipset. The new-comers, entitled GA-H81M-DS2, GA-H81M-D3V and GA-H81M-D2V, are equipped with LGA1150 socket that supports Intel Haswell CPUs. Their efficiency and durability is the result of the implementation of Gigabyte Ultra Durable 4 Plus concept, On/Off Charge and UEFI DualBIOS technologies, as well as of prime capacitors with a solid electrolyte. Each motherboard is unique, so the specifications of each item are worth of being detailed.



Gigabyte GA-H81M-DS2 features:

— 226 x 170 mm dimensions;

— the possibility of integrating up to 16 GB of two-channel DDR3 memory with up to 1600 MHz frequency;

— a pair of SATA II and SATA III ports;

— a pair of PCI Express x1 slots and a single PCI Express x16 slot;

— gigabit Ethernet port;

— Realtek ALC887 controller with the support of HD Audio sounding;

— rear I/O panel with RJ-45 port, D-Sub, …

New Gigabyte Radeon HD 7970 operates at a frequency of 1100 MHz

Gigabyte presented a new overclocking model of video card Tahiti XT, designated as GV-R797TO-3GD. In comparison to the current Radeon HD 7970 OC (GV-797OC-3GD), the newcomer has some advantages. In particular, it is known that the graphic adapter is based on the graphics chip Radeon HD 7970 GHz Edition that is selected. The clock frequency of the accelerator is increased from 1000/5500 MHz (core / memory) to the 1100/6000 MHz, comparing GV-797OC-3GD. Standard values, recall — 925 MHz GPU with chip and 5500 MHz with GDDR5 microchip.



Externally the video adapter has no changes: the PCB soldered 3 GB of memory, which combines with the GPU on a 384-bit brace. The number of stream processors is unchanged — 2048 units. The design of printed circuit board includes electrical components Ultra Durable VGA. High-effective WindForce 3X cooler consists of a copper base, a few copper heat pipes and three 80-mm fans.


Unlike its predecessor, Gigabyte GV-R797TO-3GD has a gold plated …

Overview of the Aerocool P7-C1 Midi Tower Case (Part II)

Main Features

According to the manufacturer’s specifications, the case may accommodate very large components: a video card up to 375 mm (or 400 mm in the absence of the front fans) and a power supply of up to 200 mm in length. CPU cooler may be up to 165 mm high.


Despite the construction of Aerocool P7-C1, the power supply is placed in the most common way, and the board is set to the standard six-millimetre racks. The thumbscrews for fixing it are not supplied.


Let’s have a closer look onto the drive installation. The carriers for 3.5" storage devices are simply stretched on hard drives. They are to be straightened a little to be installed. The 2.5" storage devices are attached to the carriers’ by cogs, and it is possible to mount them not only to the ends, but to the ground as well.


The carriers with the mounted hard drive are simply retracted and sit in place securely enough. And the solid-state drives are fixed to the carriers by thumbscrews.

AUTOMATIC SEARCH & INSTALL
device drivers
Freeware
Download (9MB)
DevID agent v4.43
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 05 November 2012, 01:13
Last visit: 05 November 2012, 01:13