The Refined Envy 34 All in One PC from HP

At the CES 2017 event in Las Vegas, the HP Company has presented its new AIO type PC – Envy 34.



All the key electronic components are located in the base, which also holds speakers. This peculiarity makes the device thin and adds showiness to its layout. The display is curved and possesses a 34” IPS-panel with wide viewing angles and a resolution of 3440 × 1440 pixels. The aspect ratio is 21:9.


This product is equipped with the 7th generation Intel Core CPU and up to 16 GB of DDR4 RAM memory. Optionally a discrete NVIDIA GeForce GTX 950M or an AMD RX 460 graphic accelerator can be installed. One can choose to use either a 1 TB hybrid hard disk or a standard 1/2 TB HDD and a 256 GB SSD for data storage.


Among highlights, we may distinguish a webcam, which can be put out of sight into the framework, and Qi, the inbuilt system of wireless gadgets charging.


The initial cost of this all-in-one PC is $1750.

Gigabyte Showcases GA-Z170X Gaming 3 Mainboard

Gigabyte expands its line of gaming products with a new ATX motherboard, entitled GA-Z170X Gaming 3. The key peculiarity ascribed to the model is the support for the latest Intel Skylake-S CPU (14 nm) with LGA 1151 socket. The new-comer takes Intel Z170 chipset as the basis and draws power via 24-pin ATX as well as 8-pin EPS power sockets. Besides, the board belongs to the mainstream customer segment, so its price won’t go higher than $188.



Gigabyte GA-Z170X Gaming 3 is furnished with 7-phase VRM, four slots for DDR4-3400 MHz RAM (two-channel) of up to 64 GB capacity, a pair of PCIe 3.0 x16 slots for the installation of graphics cards (support for CrossFireX and SLI configurations), a single PCIe 3.0 x4 slot, and three PCIe 3.0 x1 slots.


Storage subsystem might be organized due to six SATA III ports (bandwidth – 6 Gb/sec), three SATA Express ports (bandwidth – up to 16 Gb/sec), and a couple of M.2 slots with bandwidth index up to 32 Gb/sec.


In addition, this …

Entry-Level PC Chassis Sharkoon REX3 Series

After the release of REX8 series, Sharkoon decided to replenish its line of chassis with a new entry-level series. The series has been entitled REX3 and is currently represented by Value and Economy models. Both models are designed in Midi-Tower form factor and are ready to accept the motherboards of micro-ATX/ATX dimensional type. The other distinctive feature of the upcoming models is their price, which is targeted to attract the customers with modest and medium financial possibilities.



Chassis REX3 Value and REX3 Economy differ from their predecessors, REX8 models, by the availability of three instead of four bays for 5.25-inch drives which have the output to the frontal panel. The fourth bay is predestined for 3.5-inch drive; at the same time, the number of internal 3.5-inch bays remained the same and equals to four items. The length and capacity of casing is about to accommodate seven expansion slots of up to 29 cm in length; the height of casing allows for the …
AUTOMATIC SEARCH & INSTALL
device drivers
Freeware
Download (9MB)
DevID agent v4.37
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 31 May 2012, 15:52
Last visit: 31 May 2012, 15:52