The Introduction of Transparent Chassis from Scythe

Scythe has recently amazed the community by the introduction of absolutely transparent chassis. ACB-Type3 model preserves the cutout of the standard Mid-Tower chassis solutions, but is made of transparent acrylic plates. One more peculiarity of this model is the parallel to the base localization of motherboard. Besides, ACB-Type3 is compatible with motherboards of various form-factor, including mini-ITX, micro-ATX, and ATX.

The motherboard is accommodated on a special tray. Right under this tray the customers are able to find a set of bays designated for the installation of PSU, three 3.5-inch drives, a couple of 2.5-inch drives, and three 5.25-inch drives. The chassis is compatible with CPU coolers of up to 190 mm in height.

At the same time, this model goes without any fans or side panels; this attributes the model to Open-Air segment. The product can content itself with practically noiseless passive system.

Scythe ACB-Type3 is equipped with sufficient number of …

Antec Outs Budgetary GX500 Chassis

Antec, a well-known designer of multiple hardware solutions, has released a new budgetary chassis, codenamed GX500. The model is developed in mid-tower form-factor and features 205x476x458 mm dimensions. It is made of solid steel but is complemented by plastic patches. The case has got a totally black coating and minimum accessories. The customers are able to acquire the product for the recommended price tag of EUR 59.

Antec GX500 supports the integration of standard ATX, as well as detracted mini-ITX and micro-ATX motherboards. The internal layout is ready to accommodate two 5.25-inch drives, five 2.5/3.5-inch drives, and seven PCI expansion cards. Storage might be enlarged due to the availability of one more external 3.5-inch drive bay.

Spacing within the chassis is sufficient to pack ATX power supply unit, CPU cooler of 158 mm in height, graphics adapters of 380 mm in length, and heatspreaders (liquid-cooling) of 380 mm in length. The chassis’ exterior does not …

New External Storage from Century Japan with Four Drives

Century Japan is planning to launch in home market its new external data storage system stipulated for the installation of four hard drives. Codenamed CRCH35U3IS, this storage features 260x130x185 mm dimensions. It is able to accommodate 3.5-inch, as well as 2.5-inch drives with dedicated adapters, which support SATA 3 6 Gb/sec interface. The storage is connected to the PC with the help of high-speed USB 3.0 port.

The availability of four switches on the frontal plate of the casing is thought to be a basic distinctive feature of Century CRCH35U3IS system. Those switches allow the customers to monitor the power supply for each drive independently.

The storage receives power from a built-in power supply unit, while the ventilation activity is secured by a fan, located on the rear part within the casing. It is controlled by means of PWM technology and a special thermal sensor that enables forced activation and deactivation of rotational process.

Century CRCH35U3IS is …
Get computer-assisted driver search with our brand utility *
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 14 September 2012, 02:05
Last visit: 19 September 2012, 13:37