Meet Small-Sized QC5000M Mainboard from ASRock

ASRock enters the mainboard market with a new micro-ATX solution, entitled QC5000M. The greenhorn takes Kabini platform as the basis, featuring AMD A4-5000 hybrid processor (28 nm) with 4 Jaguar cores and 1.5 GHz clock frequency. The APU is accompanied by two slots for one-channel DDR3-1600 MHz RAM (up to 32 GB) and an integrated AMD Radeon HD 8330 graphics (500 MHz clock frequency, compatibility with DirectX 11.1 standard).



The implemented APU boasts 15 W TDP only, requiring a small-sized heatsink for efficient cooling. The model takes power via 24-pin ATX connector and is based on AMD A68 chipset. It is equipped with a single PCI Express 2.0 x16 slot, a pair of PCI Express 2.0 x1 slots, and the same amount of SATA III 6 Gb/sec ports.


Network and audio facilities are represented by Realtek RTL8111GR Gigabit Ethernet controller and 7.1-channel Realtek ALC887 codec respectively. Additionally, the PCB is furnished with ELNA sound capacitors. The rear side of the motherboard …

Announcement of video card Gigabyte Radeon HD 7970 Super Overclock

The efforts of Gigabyte engineers culminated in the release of the Radeon HD 7970 Super Overclock, also known as GV-R797SO-3GD. This is a monstrous construction with height of 64 mm (3.5 expansion slots) and a cooling system WindForce 5X. As well as preparing to be released GeForce GTX 680 SOC, the new adapter uses a five high-speed (> 4000 rev / min) fan size of 40 mm, copper evaporation chamber, and five copper heat pipes.



WindForce 5X – is one of the most expensive VGA-coolers, except for models with water blocks and liquid cooling system. It will allow to overclock Gigabyte GV-R797SO-3GD up to frequencies of 1155/7620 MHz. However, neither the temperature nor the noise performance of video card can be considered satisfactory: 85 degrees under load and 91 ° C for overclocking with increased voltage, and 8000 rpm in a heavy-duty (1185 MHz, 1.375 V) explains the situation.


Printed circuit board Radeon HD 7970 SOC is reinforced with five polymer capacitors NEC / …

Xilence presented Torino chassis for mainboards size Mini-ITX

Xilence Company has introduced its first hull with sizetype Mini-ITX – it got the name Torino (or the original codename — GEH-XP-TORINO). The manufacturer claims that the new product, despite its compact size, expressed by the dimentions 348 x 214 x 219 mm, is well suited for construction of «a full-fledged handheld gaming PC.»



Externally Xilence Torino made in the form of its older brothers, Interceptor and Interceptor Pro, and basic material of production is 0.8 mm thick steel. The hull is equipped with three external bays (one 5.25-inch size and two 2.5 inch size) and four internal (all sizes 3.5 inches). On the front panel there are two ports USB 3.0 display and two 3.5 mm jacks for headphones and microphone.


The rear panel of Xilence Torino has two bays for expansion cards. The installation of video cards up to 270 mm is also supported. According to reports of manufacturer, they fulfilled a goal of improving the ventilation of 3D-cards, which have specially …
AUTOMATIC SEARCH & INSTALL
device drivers
Freeware
Download (9MB)
DevID agent v4.36
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 19 January 2012, 16:00
Last visit: 19 January 2012, 17:21