MSI Releases an Affordable Motherboard of Micro-ATX Form-Factor

Right after the release of FM2-A75MA-P33 motherboard, MSI has taken a decision to design one more model for AMD Trinity platform. Codenamed MSI FM2-A85XMA-E35, a new model is based on a more efficient chipset – AMD A85X. This motherboard is a typical representative of entry-level solutions, though can boast a number of attractive facilities.

MSI FM2-A85XMA-E35 is developed in micro-ATX form-factor for Socket FM2 CPU sockets. The model is known to support AMD A and Athlon II processors. This board accommodates two DIMM slots for the installation of DDR3 memory modules, the overall volume of which can rise up to 32GB. The supported memory operating frequencies might vary: DDR3-1066 MHz, 1333MHz, 1600 MHz, 1866 MHz, and 2133 MHz. Power subsystem features a rather unpretentious framework and consists of five phases; thus, this model isn't intended for overclocking purposes.

Expansion facilities implemented in MSI FM2-A85XMA-E35 can be found in any other entry-level …

Biostar Announces Budget-Oriented H110MD PRO Mainboard

Biostar has replenished its PRO series of motherboards with a budget-friendly model – H110MD PRO. The greenhorn is based on Intel H110 chipset compatible with Intel Skylake Socket LGA 1151 CPUs. As far as this micro-ATX board is an entry-level solution, it offers just basic facilities, including 5-phase VRM, a pair of DIMM slots for DDR3L-1600 MHz modules (maximal capacity – 16 GB).

Biostar H110MD PRO accommodates four SATA III (6 Gb/sec) ports for storage devices, one PCI Express 3.0 x16 slot (for graphics adapter) and a pair of PCI Express 2.0 x1 slots for expansion cards. Network possibilities are ensured by means of gigabit Realtek RTL8111G controller.

The I/O panel boasts the availability of two PS/2 ports, two video ports (D-SUB and DVI-D), one RJ-45 port, three audio sockets, and four USB ports (2x USB 2.0, 2x USB 3.0). Additionally, the motherboard supports a range of advanced features, such as Biostar Flash, BIO-Flasher, BIO-Relife, Watch Dog, e-HotLine, BIOS …

LEPA to Release MX-F1 and MaxGold 1000 PSUs

LEPA is ready to release a new series of entry-level power supply units entitled MX-F1. The series counts three models of 400 W, 500 W and 600 W capacity: N400-SA-EU, N500-SA-EU and N600-SA. In addition, the company has expanded its MaxGold line with a flagship 1000-watt model. It corresponds to Intel ATX12V 2.4 standard and employs an optimized hardware design.

To begin with, MX-F1 PSUs offer 87% of ultimate efficiency. Operating at 20%/50%/100% loading, they are able to achieve 82%/85%/82% efficiency correspondingly. Nonetheless, the models cannot receive 80Plus Bronze certificate, since they feature limited voltage input range. All the models within the series employ a single +12V rail and boast a non-modular design.

This promotes for the connection of middle-efficiency components. They support Active PFC and a wide spectrum of protective functions (over-voltage, over-current, over-power, short-circuit). Cooling of internal components is ensured by a single 120 mm fan. …
Get computer-assisted driver search with our brand utility *
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 03 November 2012, 19:26
Last visit: 03 November 2012, 19:41