FSP Intros ‘Noiseless’ PSU Model Aurum Xilenser 500

FSP, a renowned developer and supplier of power supply units, introduces a new product that is widely recognized as ‘noiseless’ PSU. Codenamed FSP Aurum Xilenser 500 (AU-500FLD), it employs a passive cooling system instead of an air cooler, thus its dump operation is easily explainable. The unit also characterizes by a startling efficiency which provided for the acceptance of 80+ Gold certificate.

Aurum Xilenser 500 takes similar to Aurum Pro/CM models design with a totally black casing and a comb-like top grid enclosed in a golden stripe. The model is able to operate at the nominal 500W power and support the latest ATX12V/EPS12V standards. It should be noted that this unit utilizes a standard framework with all power connectors soldered on the printed circuit board. A set of connectors involves five SATA connectors, a single 4-contact FDD, four 4-contact Molex, and a pair of 6+2-contact PCI Express connectors. Naturally, it contains two main 24-contact and 4+4-contact …

Meet New Series of 120-/140-mm SilentWings 3 Fans from Be Quiet!

Be Quiet! announces the upcoming release of a new series of fans, entitled SilentWings 3. The lineup will consist of 4x 120-mm & 4x 140-mm items. All greenhorns are based on fluid dynamic bearing, estimated for 300.000 hours of foolproof operation. The fans employ either 3-pin or 4-pin power connectors and might run at 12V voltage index.

Be Quiet! SilentWings 3 items have a dual purpose: they can be used as system fans and as a part of CPU cooling. The 3-pin models come equipped with an adapter for the reduction of voltage from 12V to 7-5V; due to this, their noise level dwindles down to the minimal level. In contrast, the 4-pin solutions support PWM technology.

All models are fitted with a 3-phase 6-polar motor which ensures low power consumption & inconsiderable vibrations. A unique shape of blades allows for the enhancing of airflow volume; at the same time, the incorporation of a slash frame promotes for the increase of the static pressure. Moreover, new mounts help in …

MSI B75IA-E33 - cost-effective Mini-ITX board for processors Ivy Bridge

In early August, it was mentioned about the fact that MSI developer of motherboards is preparing to release three new products in the form factor Mini-ITX on chipsets A85, B75, and Z77. As it turned out, the first low-cost board will be MSI B75IA-E33 — it will start selling in Europe at the end of this week at prices ranging from € 95.

The functionality of this product is limited with respect to the other two models; however, a set of components in B75IA-E33 is very decent. LGA1155 processor socket is energized by three phases (provides additional power to the ATX12V 4-pin), hidden under a small cooler chipset Intel B75. Available one connector PCI Express 3.0 x16, two slots for memory modules DDR3-1066/1333/1600 total up to 16 GB, SATA port 6Gb / s and SATA 3 Gbit / s (3 units) to connect storage devices.

A pair of USB 3.0 on the rear panel are completed with a 19-pin connector on the PCB, through which on the front panel I / O can be taken two SuperSpeed USB. The …
Get computer-assisted driver search with our brand utility *
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 12 April 2012, 20:33
Last visit: 12 April 2012, 20:33