The Release of Two 3D Graphics Cards from Sparkle Computer

Sparkle Computer, a Taiwanese supplier of graphics solutions and consumer electronics, has released two 3D graphics cards simultaneously. The two models have been codenamed Calibre X680 Captain and Calibre X670 Captain. Both cards are based on Nvidia GK104 GPUs developed under 28 nm standards. The chief peculiarity of the products is the integration of extraordinary cooler CoolPro; the uncommonness is seen in the localization of three fans that found their places under the radiator. This radiator is connected with the base, which is in direct touch with GPU, by means of six heat pipes.

Calibre X680 Captain and Calibre X670 Captain are equipped with DisplayPort, DVI, DVI-D, and HDMI video outputs. Graphics cards employ PCI Express 3.0 interface and support DirextX 11 interface, as well as, such Nvidia technologies as CUDA, PhysX, 3D Vision, and 3D Vision Surround. They are also notable for the availability of eight-phase voltage regulators and the enhanced depth of ground on the …

EVGA GeForce GTX 660 Ti

Due to the unknown paparazzi the photos of the upcoming graphics card EVGA GeForce GTX 660 T leaked to the Internet. As it can be seen it is made almost on the reference design of Nvidia. The main differences of EVGA board from the reference — design of the casing of the cooling system, the logo on the fan housing and the clock frequency.

The video card is made on the printed circuit board on the PCI Express 3.0 x16 bus and is equipped with a proprietary dual-slot cooler of active type. Its «heart» is created on 28-nm chip with 1344 GK104 CUDA cores and advanced architecture Kepler. On board there is a 2048 MB of GDDR5 memory with 192-bit and a frequency of 6008 MHz. In fact, core graphics core frequency is 980 MHz, and accelerated by the NVIDIA GPU Boost function value is equal to 1023 MHz.

Dimensions of the cooler are the same as the GeForce GTX 670, but the circuit board is expected to be shorter. It is believed that the card uses the GPU GK104-325-A2 analogically to …

The First Take on Versa N23 Chassis from Thermaltake

Thermaltake PC cases have never been a frustration. The Versa N23 is not an exception. It is a combination of functionality balanced with modern styling and a bit of company’s passion. The middle-tower chassis draws attention by the front panel with light-blue insertions against black panel. The other attraction is the right-side panel with an integrated acrylic window.

Thermaltake Versa N23 is intended to accommodate mini-ITX, micro-ATX and ATX motherboards with the maximum of 7 expansion slots. The availability of ODD bays enables the installation of two 5.25-inch drives. The layout also welcomes five 3.5-/2.5-inch drives which might be mounted without any tools.

Internal space is enough for 160-mm high CPU coolers, PS/2 ATX power supply units and 250-mm long graphics cards. If retrieving unnecessary drive bays from the bottom section, there is a chance to install 360-mm long videocards.

To continue, air cooling configuration offers 5 seats for 120 mm fans (2x …
Get computer-assisted driver search with our brand utility *
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 08 May 2011, 01:27
Last visit: 08 May 2011, 01:27