Meet Strike-X Air and Vx Advance Series from Aerocool

Devotees of a futuristic design and uncommon framework cannot but revel in the launch of new chassis Strike-X Air from Aerocool developers. The long-awaited product is already in the market, as well as new Vx Advance series. Chassis Strike-X Air is distinguished by the ultra-original design and open-end framework type. According to the words of Aerocool representatives, the major emphasis has been made on the handiness of usage so that each person could have a direct access to any component of the chassis.

The chassis of Strike-X Air is made of steel and supports motherboards of Micro ATX, E-ATX and ATX dimension type, and graphics cards of 330 mm. length. Expansion cards and interface panels are installed due to the ten slots in the rear part of the device. The chassis is equipped with three external modules of 5.25 and 3.5 inches type. The clipboard is intended for a single USB 3.0 socket, three USB 2.0 sockets, and a couple of 3.5 mm. sockets for headsets with a microphone. … …

Asus A88X-Pro Motherboard Review: Ahead of Its Time

The elaboration of completely new APUs, codenamed Kaveri, compelled AMD work up one more suitable CPU socket – FM2+. Once after its launch, the leading manufacturers of motherboards have reacted on-the-fly, releasing proprietary models for a new platform. Asus, as usual, was among the first to introduce fresh solutions. Motherboard A88X-Pro is remarkable by the support of upcoming APUs, though it will be still possible to incorporate hybrid processors of the current generation for Socket FM2. For sure, this is not a mere advantage of the board. Let’s have a look at some other specs.

Key Peculiarities

Asus A88X-Pro is developed on AMD A88X chipset and houses an onboard Radeon HD 7000/8000 series graphics. The PCB allots 4 DIMM slots for DDR3 SDRAM modules. An overall capacity of modules set might achieve 64 GB, whereas an ultimate supported clock frequency makes up 2400 MHz. Expansion section is not as bright as a demanding customer would desire; nonetheless, it …

Spire Showcases New Cylinder-Shaped Swirl IV CPU Cooler

Spire is going to release a new extraordinary cooling solution: a cylinder-shaped CPU cooler, entitled Swirl IV. It is targeting Intel processors for Socket 2011/1366/115x/775 and AMD FM1/FM2/AM2/AM3 platforms with the maximum TDP level of 130 W. The new-comer has received RoHS and CE certification that proves its environmentally-friendly nature. An official release is postponed to January 2015.

Spire Swirl IV features 131x125x62 mm dimensions and weighs 690 g. Its heatsink consists of 45 aluminum fins, pierced by three copper zinc-plated U-shaped heatpipes (8 mm). Inside the heatsink one can find a 60 mm fan with blue LED backlit. Its rotational speed is controlled by PWM technology so that the blades could run between 600 RPM up to 2000 RPM.

The fan is equipped with a slide bearing, estimated for 50.000 hours of fool-proof operation. It is powered by means of a 4-pin connector, ensuring up to 83.12 CFM airflow at 26 dB noise. Besides, at the highest rotational speed the …
Get computer-assisted driver search with our brand utility *
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 18 June 2012, 19:57
Last visit: 20 September 2012, 16:22