Which DDR3 SDRAM is better for Ivy Bridge

The overclocker memory is now in the category of products for perfectionists, still the common users are pleased with usual modules DDR3-1600 or DDR3-1333 SDRAM. The issue appears related to the release of processors Ivy Bridge series, which in some aspects are similar to its predecessors, still have some distinctive features.

Ivy Bridge processors are restricted on the maximum frequency supported by the DDR3 SDRAM. This indicates the theoretical chance of these processors work with high-speed memory DDR3-3200 SDRAM. Developers of overclocker memory package perceived the change in rules with certain enthusiasm: there are DDR3-2400 modules available in stores. The gap in frequencies of «elite» and «running» versions of the memory has grown twice in size. It won’t have a noteworthy blow on the work of commonly used tasks in systems.

The memory controller in the Ivy Bridge can work both in symmetric mode, with delay, frequency and volume modules in memory channels, and …

PowerColor Intros New Graphics Card with Fling Force Cooler

TUL Corporation, in the framework of its PowerColor brand, introduces a new graphics card with quite an original way of air cooling organization. The new-coming adapter, codenamed PowerColor Radeon HD 7850 Fling Force, employs 'two-storied' cooler of an unusual structure. Along with an aluminum heatsink, copper heat pipes, and a voluminous fan, the manufacturer implemented non-monolithic fan ribs. Their tips are fixed to the main part in a way to change their location relative to the plain of rotation.

On conditions of low rotational speed, tips of the ribs are located at approximately 80 degrees angle relative to the graphics card. On conditions of heightened speed, the ribs become more linear; this way, the impeller diameter enlarges from 92 mm to 95 mm. Such structural approach to the fan framework develops into an improved performance and air cooling effect.

The model is based on Pitcairn chip, developed on Graphics Core Next architecture under 28 nm technological …

SilverStone Replenishes Its Nitrogon Series with Two Coolers

SilverStone, a Taiwanese manufacturer of high-end cooling solutions, has recently launched two new coolers codenamed NT01-PRO and NT06-PRO. Both models replenish the Nitrogon series and distinguish themselves by utmost compatibility. Hence, this couple is able to cool down practically all CPU systems developed by AMD and Intel, due to the support of sockets AM2, AM3, FM1, FM2 (AMD) and LGA775, 1155, 1156, 1366, and 2011 (Intel).

Coolers NT01-PRO and NT06-PRO consist of a copper-nickeled base, six heat pipes (6 mm each) and single-section aluminum heatsink. The first model NT01-PRO is delivered without nominal fans and features 140x97x120 mm dimensions. The customer gets the right to decide which fans, 70 mm or 80 mm, will provide more cooling effect to CPU. This cooler will benefit the most if integrated on the rear or top panel of PC chassis.

The second model NT06-PRO features 140x82x139 mm and is delivered with a single 120 mm fan. Its rotational speed is monitored by …
Get computer-assisted driver search with our brand utility *
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 01 November 2012, 02:24
Last visit: 24 September 2014, 11:19