Xilence presented Torino chassis for mainboards size Mini-ITX

Xilence Company has introduced its first hull with sizetype Mini-ITX – it got the name Torino (or the original codename — GEH-XP-TORINO). The manufacturer claims that the new product, despite its compact size, expressed by the dimentions 348 x 214 x 219 mm, is well suited for construction of «a full-fledged handheld gaming PC.»

Externally Xilence Torino made in the form of its older brothers, Interceptor and Interceptor Pro, and basic material of production is 0.8 mm thick steel. The hull is equipped with three external bays (one 5.25-inch size and two 2.5 inch size) and four internal (all sizes 3.5 inches). On the front panel there are two ports USB 3.0 display and two 3.5 mm jacks for headphones and microphone.

The rear panel of Xilence Torino has two bays for expansion cards. The installation of video cards up to 270 mm is also supported. According to reports of manufacturer, they fulfilled a goal of improving the ventilation of 3D-cards, which have specially …

Asus to Start Shipping Radeon R9 290 DirectCU II OC Graphics Card

Next week Asus is going to start shipping its newest graphics card from Radeon R9 series. Codenamed Radeon R9 290 DirectCU II OC, it is based on an original PCB with black-and-red design and the incorporation of an exclusive DirectCU II cooling system. Plus, the availability of ‘OC’ in the codename implies the availability of factory overclocking.

Asus Radeon R9 290 DirectCU II OC takes GCN Hawaii core with 2816 stream processors as the basis. It operates at an overclocked 1000 MHz frequency. The model is equipped with 4 GB of GDDR5 memory (512-bit bus) that runs at an effective 5400 MHz frequency. Just for a comparison, etalon adapter from AMD runs at 947 MHz/ 5000 MHz for GPU/memory correspondingly.

DirectCU II cooler consists of a heatsink, four copper nickel-plated heatpipes (two of them feature 10 mm dimensions), and two high-performance fans: one ordinary and one CoolTech. The card receives power via 6+8-pin connectors and might require not less than 600 W PSU.

Which DDR3 SDRAM is better for Ivy Bridge

The overclocker memory is now in the category of products for perfectionists, still the common users are pleased with usual modules DDR3-1600 or DDR3-1333 SDRAM. The issue appears related to the release of processors Ivy Bridge series, which in some aspects are similar to its predecessors, still have some distinctive features.

Ivy Bridge processors are restricted on the maximum frequency supported by the DDR3 SDRAM. This indicates the theoretical chance of these processors work with high-speed memory DDR3-3200 SDRAM. Developers of overclocker memory package perceived the change in rules with certain enthusiasm: there are DDR3-2400 modules available in stores. The gap in frequencies of «elite» and «running» versions of the memory has grown twice in size. It won’t have a noteworthy blow on the work of commonly used tasks in systems.

The memory controller in the Ivy Bridge can work both in symmetric mode, with delay, frequency and volume modules in memory channels, and …
Get computer-assisted driver search with our brand utility *
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 01 January 2012, 17:20
Last visit: 01 January 2012, 17:20