Evga Unveils More Information about Z77 Mini ITX Motherboard

Last month Evga announced the release of its new motherboard of mini ITX form-factor based on Intel Z77 chip. Currently, there is no information concerning the exact release date, although the company keeps the suspense by providing more data about the future product. The motherboard will be codenamed Evga Z77 Mini ITX and will be compatible with LGA 1155 socket. The board will own unmatched properties to provide for the extreme overclocking facilities.



Evga Z77 Mini ITX is developed on eight-channel power supply subsystem that employs DrMOS IR3550M components. Additional power is supplied by 8-contact EPS12V socket. The motherboard is equipped with Marvell controller that takes responsibility for the operation of eSATA 6 Gb/sec interface on the rear panel. This interface is represented by a couple of eSATA ports. In addition, the rear panel accommodates video slot HDMI, Thunderbolt port, RJ-45 slot (gigabit Ethernet), optical S/PDIF, five Mini-Jack slots (under control of …

Company XFX is preparing Radeon HD 7970 GE with Double Dissipation cooler

American vendor XFX is about two weeks to release a Radeon 7970 Edition Double Dissipation (model code — FX-797G-TDF). It combines the capabilities of GPU Tahiti XT2 with a higher overclocking potential and the TDP, rather than at Tahiti XT, PCB reference design, but without a single phase power supply (6 +1), and the cooling system in the vaporizing chamber, an array of aluminum fins, PA plate (the same heatsink for the VRM and memory), as well as the two fans standard size 90 mm.



New model will get the recommended for the Radeon HD 7970 GE frequency ratio 1000/6000 MHz for core and chips GDDR5. The graphics chip will operate at 1050 MHz in the load. Recall that the “usual” HD 7970 was limited to regular frequencies 925/5500 MHz and did not support dynamic overclocking.


The configuration of video outputs is almost standard: from the five of DVI-I, DVI-D, HDMI and 2x Mini DisplayPort for some reason excluded DVI-D. The additional power is supplied by one 8-pin and one …

Spire Tricer 1411 Chassis

The micro ATX PC series has been recently joined up by the Tricer 1411 model. This new PC framework matches the up-to-date specification benchmark and system architecting norms. The Tricer 1411 possesses all special aspects, necessary for a Micro ATX tower case, among which one can find 4 × 120 mm fan mountings and a 120 mm black fan on the rear.



The front design is simple and stylish, though featuring full functionality. Spire Tricer 1411 chassis is designed out of 0.45 mm SPCC steel and is easy to assemble. The Optical, HDD or SSD Drives can be mounted. There are USB 3.0, USB 2.0 and AC97/HD audio ports on the front panel.

Key features:

• Front 1×USB 3.0, 2×USB 2.0 and HD/AC97/AUDIO

• SD/TF card reader

• Solid steel construction

• Compatible with Micro ATX mainboards

• Easy to install

• Refined internal area design

• Enough place for 2×92 mm and 2×120 mm cooling fans

• 1×120 mm black cooling fan on the rear in standard samples

• 2 …
AUTOMATIC SEARCH & INSTALL
device drivers
Freeware
Download (9MB)
DevID agent v4.37
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 06 May 2011, 12:02
Last visit: 06 May 2011, 12:21